FCTC Study Guide Test prep Correct Questions And Answers

Grooming Standard Essay - ANSWER Take 10 minutes to read and write about the grooming standards Gears - ANSWER A gear or cogwheel is a rotating machine part having cut teeth, or cogs, which mesh with another toothed part to transmit torque Gear Train - ANSWER Two or more gears working in a sequence meshed - ANSWER If the gears are touching adjacent - ANSWER near, next to, adjoining If the gears are touching then which way are the adjacent gears roatating? - ANSWER Move in opposite directions Rack - ANSWER a non-rotating toothed part, called a When two gears mesh, and one gear is bigger than the other (even though the size of the teeth must match), what occurs - ANSWER mechanical advantage is produced, with the rotational speeds and the torques of the two gears differing in an inverse relationship. Spur gears - ANSWER straight-cut gears parallel - ANSWER Side by side and having the same distance continuously between them:"parallel lines never meet" A belt and pulley system is characterized by - ANSWER two or more pulleys in common to a belt clockwise - ANSWER flowing the same direction a clock would flow Counter clockwise - ANSWER Flowing the opposite direction a clock would flow analogous - ANSWER comparable flanges - ANSWER an edge that sticks out used to strengthen an object by holding it in place or attaching it to another object rope and pulley system - ANSWER is characterized by the use of a single continuous