API 510 Practice Test (Referenced) 100% Solved 2024

API 510 Practice Test (Referenced) 100% Solved 2024 Substituting NDE procedures for a pressure test after major repair may be done only after: API 510 5.8.8.1 - Answer- The engineer and inspector have approved. An example of vessels not covered by API 510 are: API 510 1.1.1 - Answer- Vessels officially retired from service and abandoned in place. ACFM is an acronym for: ASME SEC 5 Article 15 - Answer- Alternating Current Field Measurement A pneumatic testing precedure should be developed by whom before conducting the test? API 510 5.8.6 - Answer- Engineer A signal of discontinuity in the material under nondestructive examination is considered: API RP 577 3.1.36 - Answer- Indication In what type of service should vessels be evaluated for potential fatigue cracking failures and have appropriate inspections planned? API 510 5.4.4 - Answer- Cyclic Service Corrosion and other damage identified during inspections and examinations must be characterized, sized, and evaluated per Section 7 (Inspection Data Evaluation, Analysis, and Recording) with deviations from the inspection plan being approved by whom? API 510 5.5.1 - Answer- Inspector or Engineer Inspection tasks typically associated with hot tapping or welding on in-service equipment should include: API 577 11.2.5 - Answer- Positive Metal Identification (PMI) Any repair welding should be performed according to a procedure accepted by the: API 510 8.1.1 - Answer- Inspector or Engineer Welding of carbon steel with carbon contents over 0.30% API 510 8.1.5 - Answer- May need special attention and preheating to avoid weld cracking.