MSSC Study Guide Questions With Correct Answers

Regulations must always be followed when cleaning up _______________. - Answer small amounts of asbestos A cope of the relevant OSHA standard must be available to workers who attend - Answer Osha required training An employee that is promoted __________. - Answer Usually receives additional training for the new position In manufacturing, changes to processes, equipment and people are the largest drives of - Answer training In today's competitive markets, processes and people are constantly changing, resulting in a large need for - Answer Training Operators should be given more training specifically related to the machine if what occurs? - Answer The operator is not producing the parts that meet specifications A machinist who was learned to weld has undergone - Answer Cross-training Companies have a better ability to match workers to specific job needs if they use - Answer Cross-training Cross-training increases and employee's value to the company because they have additional skills and - Answer A better understanding of related job functions Job shadowing requires a employee that is being cross-trained to __________. - Answer Work closely alongside an experienced worker as their shadow An employee will receive an update to their training record to reflect their certification when. - Answer forklift training is completed Companies often add production by adding another shift. if operators are hired for a new shift, what will be needed? - Answer Training records of existing operators. Documentation on the quality of a training session. - Answer Is not required The training department is the typical source of ___________ information. - Answer procedures and policy The equipment manufacturer is often the best source of ____________. - Answer Training on a new piece of equipment When a new piece of equipment is installed, operators should receive __________ before the machine goes into production. - Answer Training When is the best time to offer safety - related training to employees? - Answer At the new employee orientation Communicating __________ is important when training employees. - Answer at the appropriate level Measurable __________ are important to the training process. - Answer Objectives An organizational method for the production areas that groups together all the machines that are needed to produce a part or a group of parts is called ___________ manufacturing. - Answer Cellular Priority jobs should be discussed __________. - Answer At the beginning of shift meetings ______________ Management presents the information about the production process in a visual format so that workers can use it to improve efficient and promote safety. - Answer Visual A _____________ is used to establish a baseline measurement for evaluation of the process. - Answer Metric When team members reach a significant point in their work to improve a process, it is called a _____________. - Answer Milestone A team leader is responsible for setting up internal quality adults to verify that ____________. - Answer Procedures are in place and being followed One method used by ___________ to get a team started in the right direction is to sequence the startup activities. - Answer A team leader To be successful in achieving a goal, a ______________ must be capable of bringing people together, motivating them and finally focusing them in the right direction. - Answer Leader An average worker's productivity would be included in __________. - Answer job standards description The specific tasks an employee will be required to perform are described in _______________________. - Answer Job descriptions Project management should include a ____________ to enable team leaders on other projects to identify availability of potential team members. - Answer Planned release of personnel as the project comes to an end Communications skills used by team members should include ___________, oral communication, written comprehension, and listening skills. - Answer Written communication Data results are required to be made available to employees who participate in __________. - Answer Environmental tests Every person in the company is responsible for __________. - Answer Preventing unsafe conditions Everyone in the workplace is responsible for __________. - Answer Accident prevention _________________ is the cause of many industrial accidents - Answer Carelessness OSHA stands for - Answer Occupational Safety and Health Administration _________ is the federal agency that publishes and enforces safety and health regulations for companies in the united states. - Answer OSHA Everyone is responsible for __________. - Answer accident prevention Taking corrective action based on safety suggestions from employees will __________. - Answer Encourage employees to report safety suggestions The __________ should be informed if one of the contractors is creating or operating in an unsafe condition. - Answer Project manager You should immediately report __________ to reduce the possibility of other complications. - Answer on-the-job injuries OSHA conducts inspections for a number of reasons, which are categorized into four priority levels according to their severity. A Priority 1 indicates __________. - Answer Imminent danger -- a danger that may cause death or serious physical harm The company handbook usually contains policies on a wide variety of topics, including _________. - Answer Safety regulations A walk-through safety inspection is performed by the company's __________. - Answer Safety committee Anyone who notices another employee engaging in an unsafe practice should __________. - Answer give constructive input to the employee to encourage good safety practice If you note that an air handling machine is making a noise you think might be abnormal what should you do? - Answer Contact the maintenance department If you notice a forklift truck driver operating the forklift while falling asleep, you should __________: - Answer Get them off the forklift The team leader or supervisor should immediately be told of _____________. - Answer Any industrial injuries What should a worker do if a paint filtering system breaks down and paint is being blown out on top of the roof? - Answer The system should be shut down When circumstances at work create a dangerous situation, you should __________. - Answer Not proceed until the dangerous situation is elminated A Safety team may decide a safety audit is required when ___________. - Answer An accident occurs involving an oil spill An assessment of safety and environmental compliance is required when ___________. - Answer Installing new equipment Potential hazards associated with equipment should be identified when ___________. - Answer New equipment is being designed for a process Which of the following should be done when a new or different machine installed? - Answer A job safety analysis Supervisors and/or safety committees should be made aware of _________. - Answer Possible improvements in ergonomics Human caused emergencies may be broken down further into two sub-categories __________ and accidental. - Answer hostile New employees or contractors should be instructed on proper evacuation procedures __________. - Answer To ensure they can exit the facility safely in case of an emergency Operation procedures would not normally be found in ________________. - Answer Emergency manuals When an alarm sounds, you should initiate emergency shutdown procedures and evacuate __________. - Answer Immediately The human resources department is the most common source of information about - Answer Appropriate behavior An employee should perform an immediate emergency shutdown of their machine and evacuate the building if _____________. - Answer An evacuation alarm goes off, whether or not there is a sign of danger Hearing protection includes ear plugs, canal caps and ____________________. - Answer Ear Muffs When working under equipment or personnel, __________. - Answer Head protection is needed Safety glasses with side shields should be used when working with ____________. - Answer A grinding wheel Welding creates a bright light that can damage the __________. - Answer eyes A ____________ should be worn to protect the face from splashes or flying particles - Answer Face shield Personal protection devices, such as safety glasses and welding helmets, should be inspected ___________________. - Answer To ensure they are not damaged and have a proper fit