AMPP practical Exam Questions and Answers Best rated A+ Guaranteed Success Latest Update

God Doesn't Value Weird Souls (high voltage holiday test) - Make sure the structure is GROUNDED Make sure the surface is DRY Use appropriate VOLTAGE Never point the WAND at someone No SOLVENT fumes are present. Qualitative - Data in the form of recorded descriptions rather than numerical measurements. Low voltage wet sponge SP0188 - Used on coatings up to 20 mils If more than 10 mils add 1oz / gallon Use tap water Can't be used on zinc Soluble salts test - Sleeve test- massage sleeve for a min. Of 2 mins. Test with titration tube. Results are in PPM Bresel patch- inject the needle through the foam. inject a min of 4x for 2 mins . Tested using a conductivity meter. Higher conductivity = higher salts displayed in mg/m2 Potassium ferriccyanide- qualitative test . Mist with distilled water, blue means they are present. relative humidity - Less than 85% Dew point - 5 degrees less than surface temp potassium ferricyanide test - Qualitative test Use distilled waterWFT equation - DFT / SBV = WFT Consumption of paint ( 1604 SMILES) - (1604x SBV/ Mil )(Efficiency) = X (SF of coating coverage)(X) = gallons transfer efficiency - Accounts for loss. 100%- %loss = TE