CWB 47.1 Questions With Correct Answers Already Passed!!

CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification. True or False? - True Certification can be considered as an approval of the products fabricated by a certificated company? True or false?! - False What does "class" refer to? A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel. B) Electrode groups C) a category of welder qualification, e.g., F, H,V or O welding position D) Fillet and groove we'd combined test plate assemblies - C What does classification refer to? A) "T", "S", "FW", "ASW" or "WT" designation of welding personnel. B) Electrode groups C) a category of welder qualification, e.g., F, H,V or O welding position D) Fillet and groove we'd combined test plate assemblies - A What organization administer CSA Standard W47.1 A) there is no administrator B) Canadian standards association C) Canadian welding bureau - C The Canadian welding bureau can withdraw a company's certification if the company is NOT following the requirements of CSA standard W47.1 True or false ? - TrueHow many divisions of certification are specified in CSA Standard W47.1 ? A) one B) two C) three D) four - C Is a company certified in division 1 required to employ a full time or retain a part time welding engineer? A) retain a part time welding engineer B) employ a full time welding engineer C) no engineer is required D) employ a full time welding inspector only - B Is a company certified in division 3 required to employ a full time or retain a part time welding engineer? A) Employ a full time welding engineer B) Retain a part time welding engineer C) retain a part time welding engineer responsible to the company only for welding procedures and practice D) No welding engineer is required - D