Ch11 ClientPro TestOut Practice Questions | Verified | Guaranteed Success

You started using a new Windows server three months ago. Since that time, you have found that the system slows down and crashes from time to time. You want to look at a report that shows important events for the server since it was installed. You'd like to see when software was installed and if there are any hardware or application failures. What is the simplest way to view this information? Open Reliability Monitor. EXPLANATION The reliability and problem history chart in Reliability Monitor keeps track of overall server health on a daily basis. It shows you a historical record of system changes and events. It assigns an overall server health value to each day (1 being the least stable and 10 being the most stable). You might be able to create filters or a Custom View in Event Viewer to see the same kind of information. However, if the event logs were full or cleared, data might be missing. In addition, you would have to configure the Custom View and then possibly interpret the events that you see. With Performance Monitor, you can configure objects and counters to see current information. But, you cannot go back and review past information. You can use a Data Collector Set to capture information. However, the collector must be configured and running in order to view historical data. You are viewing the reliability and problem history chart in Reliability Monitor on a Windows system. Some sections of the graph are displayed with a dotted line. What does the dotted line indicate? There is not enough data to calculate the stability index. EXPLANATION A dotted line in the reliability and problem history chart indicates there is not enough data to calculate a stability index, which can be caused by a variety of factors.A dotted line in the reliability and problem history chart does not indicate that monitored values exceeded configured threshold, a system crash occurred, or that a system update was installed. What data on a Windows system is monitored to create the reliability and problem history chart in Reliability Monitor? (Select two.)