100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached 4.2 TrustPilot
logo-home
Exam (elaborations)

EPA Type III Correct questions & Answers!

Rating
-
Sold
-
Pages
2
Grade
A+
Uploaded on
14-11-2023
Written in
2023/2024

What type of equipment can be worked on with Type III certification? - ANSWER low pressure The most efficient method of leak checking a charged low-pressure refrigeration unit is to - ANSWER pressurize the system by the use of controlled hot water or heater blankets When pressurizing a system, do not exceed - ANSWER 10 psig After reaching the required vacuum on an appliance when servicing, moisture is indicated by - ANSWER multiple rises in pressure over a period of time with increase of pauses between rises EPA required evacuation levels for recovery or recycling equipment manufactured or imported before Nov. 15, 1993 is - ANSWER 25 inches Hg EPA required evacuation levels for recovery or recycling equipment manufactured or imported on or after Nov. 15, 1993 is - ANSWER 25 mm Hg absolute What can be used to pressurize a chiller system before opening the system for a non-major repair? - ANSWER controlled hot water Refrigerant recovery from a system using R-11 or R-123 starts with - ANSWER liquid removal and is followed by vapor recovery If a strong odor is detected during the recovery process, - ANSWER a compressor burn-out may have occurred When installing more than one, pressure relief valves must be installed - ANSWER in parallel The owner must keep records of refrigerant added during service and maintenance on equipment - ANSWER with charges of 50 lbs. or greater After all the liquid has been removed from an average 350 ton approximately how much vapor refrigerant remains in the system - ANSWER 100 lbs. When charging a system with a low pressure refrigerant should be introduced as a vapor to raise saturation temperature to a minim of - ANSWER 36 degrees Where is the purge unit located in a low-pressure system? - ANSWER the top of the condenser In a chiller, air and other noncondensables collect - ANSWER at the top section of the condenser A rupture disk for low pressure chiller will rupture at - ANSWER 15 psig The Standard for machine room safety is - ANSWER ASHRAE-15

Show more Read less
Institution
EPA
Course
EPA








Whoops! We can’t load your doc right now. Try again or contact support.

Written for

Institution
EPA
Course
EPA

Document information

Uploaded on
November 14, 2023
Number of pages
2
Written in
2023/2024
Type
Exam (elaborations)
Contains
Questions & answers

Subjects

Get to know the seller

Seller avatar
Reputation scores are based on the amount of documents a seller has sold for a fee and the reviews they have received for those documents. There are three levels: Bronze, Silver and Gold. The better the reputation, the more your can rely on the quality of the sellers work.
papersmaster01 Howard Community College
View profile
Follow You need to be logged in order to follow users or courses
Sold
280
Member since
2 year
Number of followers
106
Documents
14075
Last sold
2 days ago
PAPERSMASTER01

On this page you will find documents , package deals, flashcards offered by seller PAPERSMASTER01.With our documents on your side you"ll be well equipped to tackle you exams and achieve the grades you need.

3.9

71 reviews

5
22
4
33
3
9
2
3
1
4

Recently viewed by you

Why students choose Stuvia

Created by fellow students, verified by reviews

Quality you can trust: written by students who passed their tests and reviewed by others who've used these notes.

Didn't get what you expected? Choose another document

No worries! You can instantly pick a different document that better fits what you're looking for.

Pay as you like, start learning right away

No subscription, no commitments. Pay the way you're used to via credit card and download your PDF document instantly.

Student with book image

“Bought, downloaded, and aced it. It really can be that simple.”

Alisha Student

Frequently asked questions