Module 26111- Wiring Commercial and Residential fully solved graded A+

Module 26111- Wiring Commercial and Residentiala green screw terminal on a device is to be used for the _____ wire a. grounding a device labeled CO/ALR can be used with ______ wire b. copper , aluminum, or copper-clad aluminum the UL label on a device means the device_____ d. has undergone testing it a nationally recognized lab and meets the minimum safety requirements in relation to switches, the term throw refers to the _______ c. number of internal operations that a switch can perform the term pole as it applies to a switch refers to the ______ a. number of paths that the switch will control in the circuit a double pole, single throw switch opens or closes _____ conducting paths at the same time b. 2 receptacles are rated_____ b. according to voltage and amperage capacity the nec requires that all receptacles installed on 15A and 20A branch circuits be _____ receptacles c. grounding the correct recpt. terminal and wire color code is ______ b. green terminal-ground wire, silver terminal-white conductor, brass terminal-black conductor NEC section 110.22 requires that all disconnecting means be _____ b. clearly identified for it's use according to OSHA, ________ c. all disconnect devices for circuits, feeders, and equip must be clearly and permanently marked to show their purpose the NEC requires that all outlet boxes be ______ b. accessible after bending a conductor into the proper shape for terminating, you should wrap the short end of the u shaped conductor around the screw in a ______direction b. clockwise the NEC requires that switch, receptacle, and fixture boxes be ______with the finished face of the wall surface when combustible materials are being used ed flush to strip insulation when splicing wire, _____ should be used b. wire strippers