BTEC Level 3 Engineering: Unit 1 (P3) – Health and Safety in the Engineering Workplace

You will receive 1 page fully detailed assignment answer to the following question: P3: Describe the methods used to identify hazards in a working environment. BTEC Level 3 Subsidiary Diploma in Engineering. Part of Assignment 2 - Controlling Hazards & Risks in the Workplace BTEC Level 3 Engineering: Unit 1 – Health and Safety in the Engineering Workplace Describe the methods used to identify the health and safety hazards that may be present in the working environment with which you are familiar. Health and Safety at Work Act 1974 Health and Safety Executive (HSE) Understand the key features of health and safety legislation and regulations legislation eg Health and Safety at Work Act 1974, Employment Act 2002, Factories Act 1961, Fire Precautions Act 1971; regulations eg Employment Equality (Age) Regulations 2006, Management of Health and Safety at Work Regulations 1999, Provision and Use of Work Equipment Regulations (PUWER) 1998, Control of Substances Hazardous to Health (COSHH) Regulations 2002, Lifting Operations and Lifting Equipment Regulations 1998, Manual Handling Operations Regulations 1992, Personal Protective Equipment at Work Regulations 1992, Confined Spaces Regulations 1997, Electricity at Work Regulations 1989, Control of Noise at Work Regulations 2005, Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR) 1995, Working Time Regulations 1998, Workplace (Health, Safety and Welfare) Regulations 1992, Health and Safety (First Aid) Regulations 1981, Supply of Machinery (Safety) (Amendment) Regulations 2005 (SI 2005/831) Roles and responsibilities of those involved: employers; employees; Health and Safety Executive (HSE) eg span of authority, right of inspection, guidance notes and booklets; others eg management, subcontractors, public, suppliers, customers, visitors. Roles and responsibilities of those involved: employers; employees; Health and Safety Executive (HSE) eg span of authority, right of inspection, guidance notes and booklets; others eg management, subcontractors, public, suppliers, customers, visitors. How to identify and control hazards in the workplace Within the workplace: methods to identify hazards eg statements, analysis of significant risks, prediction of results or outcomes of those risks, use of accident data, careful consideration of work methods. Working environment: consideration of the workplace and its potential for harm eg confined spaces, working over water or at heights, electrical hazards, chemicals, noise. Hazards which become risks: identification of trivial or significant risk; potential to cause harm; choosing appropriate control measures; electrical safety eg identify and control hazards, cause of injury, effects of electricity on the body, circuit overloading; mechanical safety eg identify and control hazards, cause of injury, rotating equipment, sharp edges; safety devices eg residual current device (RCD), fuses, guards, fail safe, sensors. Be able to carry out a risk assessment and identify control measures Risk assessments: items/area to be assessed eg machine operation, work area; five steps (principal hazards, who is likely to be injured/harmed, evaluate the risks and decide on adequacy of precautions, recording findings, review assessment). Use of control measures: eg remove need (design out), use of recognised procedures, substances control, guarding, lifting assessments and manual handling assessments, regular inspection, use of Personal Protective Equipment (PPE), training of personnel, other personal procedures for health, safety and welfare. Understand the methods used when reporting and recording accidents and incidents Principles: why employers keep records of serious accidents, incidents and emergencies; responsibilities of competent persons; cost of accidents eg direct, indirect, human consequences; trends eg major causes, fatal and serious injury, methods of classification, statistics. Recording and reporting procedures: regulations on accident recording and reporting eg Reporting of Injuries, Diseases and Dangerous Occurrences Regulations (RIDDOR) 1995, accident book, company procedures; procedures to deal with near misses or dangerous occurrences. what is the estimated percentage of people in the uk who are affected by manual handling injuries? health and safety regulations in engineering workshop list of health and safety legislation health and safety at work act health and safety at work act employees responsibilities health and safety at work regulations 1999 management of health and safety at work regulations 1999 risk assessment list of health and safety legislation workplace health safety and welfare regulations 1992 benefits of the management of health and safety at work regulations 1999 HSE roles and responsibilities of employees and employers what are my responsibilities as an employee? health and safety at work act 1974 employees responsibilities section 7 engineering and environmental health and safety btec level 3 national engineering teaching resource pack pdf btec level 3 engineering unit 1 assignment 2 pearson btec level 3 unit 1 health and safety assignment 2 Controlling Hazards & Risks in the workplace