Level 2 Dante Operations Test | Questions with 100% Correct Answers | Latest Update 2024 | Verified

Level 2 Dante Operations Test | Questions with 100% Correct Answers | Latest Update 2024 | Verified Connect the Dante chipsets with the maximum number of audio channels they support: Dante AV Ultimo -X PCIe Card HC and IP Core Broadway Brooklyn II - ✔✔ -64x64 -512x512 -4x0, 2x2, 0x4 -16x16 -8x8 -128x128 What protocol does Dante for clockin g? - ✔✔A. NTP B. PTP C. SMPTE Time Code As a simple rule of thumb, how much latency should be allowed per network switch hop? - ✔✔A. 0.001 msec (1 microsecond) B. 0.01 msec (10 microseconds) C. 0.1 msec (100 microseconds) D. 1.0 msec If a transmitting device runs out of flows, what should you do to enable all subscriptions to be made? - ✔✔A. Get a managed switch with Packet Propagation Protocol (PPP) to duplicate a stream with new destination IP addresses. B. Flip stream(s) to unicast so it only takes one flow for multiple destinations. C. Flip stream(s) to multicast so it only takes one flow for multiple destinations. D. Add a Dante AVIO "repeater" module, which will accept a stream and retransmit it with up to 32 more streams. The redundant port allows for a second network connection in case the first fails. Which describes the operation? - ✔✔A. Primary and secondary can be connected in the same broadcast domain (VLAN). If one cable fails, the other will take over. B. The secondar y network is dormant until a problem is encoutered on the primary. In that case, the primary network shuts down, and the secondary network starts sending and receiving data.