MTA 98-366 Networking Fundamentals Lesson 1 Practice Questions And Answers

MTA 98-366 Networking Fundamentals Lesson 1 Practice Questions And Answers Which of the following regenerates a signal and broadcasts that signal to every computer connected to it? - ANS-Hub Which of the following is not a central connecting device? - ANS-Windows 7 Client You need to install a network adapter to a computer so that it can be connected to a network that uses twisted-pair cabling. What type of port does the network adapter need to use? - ANS-RJ45 Where can you go in Windows 7 to access the Properties of a network adapter? - ANSDevice Manager You need to connect a computer's network adapter to a switch. You want the connection to be able to send and receive data simultaneously. What type of connection do you need? - ANS-Full Duplex You need to connect a computer at a rate of 100,000,000 bits per second. What speed network adapter should you install? - ANS-100 Mbps You need to connect to a router that has the IP address 192.168.1.100 on a standard, default Class C network using the subnet mask 255.255.255.0. Which of the following is a valid IP address for your network adapter? - ANS-192.168.1.1 You have just installed a network adapter and configured an IP address and subnet mask. What command can you use to verify that the IP address is configured and listed properly? - ANS-Ipconfig You need to ping your own computer to see if it is alive. Which of the following would qualify as command-line syntax to do so? - ANS-Ping loopback You have been instructed to connect a computer to a group of hosts that have been segmented from the regular network. What kind of network is this? - ANS-VLAN The manager of IT asks you to connect a perimeter network to the firewall, which will be separate from the LAN. This type of network is known as a ______________. - ANS...