9/4/23, 9:54 PM Assessment 3: Attempt review
QUIZ
Started on Monday, 4 September 2023, 9:20 PM
State Finished
Completed on Monday, 4 September 2023, 9:52 PM
Time taken 32 mins 10 secs
Marks 38.00/40.00
Grade 95.00 out of 100.00
Question 1 System safety is a sub-discipline of system _____________ that applies ___________ ,
Incorrect engineering, and management principles to ensure adequate safety.
Mark 0.00 out of
1.00 a. safety; scientific
b. engineering; safety
c. safety; quality
d. engineering; scientific
The correct answer is: engineering; scientific
Question 2 Lifting tackle must be examined at least every _________months by a competent person and
Correct the results of the examination must be indicated in a book kept for this purpose.
Mark 1.00 out of
1.00 a. five
b. six
c. four
d. three
The correct answer is: three
Question 3 No person may operate a ____________ at a speed in excess of the maximum speed set by the
Incorrect manufacturer for the saw blade; or if the saw blade is damaged or dull or if the blade is not the
regular blade or correctly sharpened and set.
Mark 0.00 out of
1.00
a. power-driven bench saw
b. tilting table saw
c. set screw
d. power-driven circular saw
The correct answer is: power-driven circular saw
https://mymodules.dtls.unisa.ac.za/mod/quiz/review.php?attempt=13028827&cmid=625064 1/11
, 9/4/23, 9:54 PM Assessment 3: Attempt review
Question 4 The criteria for accreditation of the GradSaiosh is:
Correct
Mark 1.00 out of a. Grade 12 (Matric) + 3 years further study or 360 NQF credits in Occupational
1.00 Safety and at least three years of experience after completion of their NQF level
6 qualification.
b. Grade 12 (Matric)
c. Grade 12 (Matric) + 3 years further study or 360 NQF credits in Occupational Safety
and at least three years of experience after completion of their NQF level 4
qualification.
d. Grade 12 (Matric) + 1 year further study or 120 NQF credits in Occupational Safety
and at least one year of experience after completion of their NQF level 5
qualification.
The correct answer is: Grade 12 (Matric) + 3 years further study or 360 NQF credits in
Occupational Safety and at least three years of experience after completion of their NQF level
6 qualification.
Question 5 What are the microorganisms that may cause an infection, allergy, toxicity or any other danger
Correct to the health of people?
Mark 1.00 out of
1.00 a. Hazardous biological agents
b. Decontamination
c. Respiratory protective equipment
d. Personal hygiene
The correct answer is: Hazardous biological agents
Question 6 Any person who contravenes these regulations or who fails to comply with a provision of any
Correct of these regulations will be guilty of an offence and may be fined up to ______________ or
imprisoned for not more than _________________.
Mark 1.00 out of
1.00
a. R1 300; eight months
b. R1 500; ten months
c. R1 200; seven months
d. R1 000; six months
The correct answer is: R1 000; six months
Question 7 What element must have a factor of safety by indicating the maximum load that they are
Correct designed to lift with safety?
Mark 1.00 out of
1.00 a. Hatchways
b. A lifting tackle
c. Power-driven lifting machine
d. Ropes of chains
The correct answer is: Ropes of chains
https://mymodules.dtls.unisa.ac.za/mod/quiz/review.php?attempt=13028827&cmid=625064 2/11
QUIZ
Started on Monday, 4 September 2023, 9:20 PM
State Finished
Completed on Monday, 4 September 2023, 9:52 PM
Time taken 32 mins 10 secs
Marks 38.00/40.00
Grade 95.00 out of 100.00
Question 1 System safety is a sub-discipline of system _____________ that applies ___________ ,
Incorrect engineering, and management principles to ensure adequate safety.
Mark 0.00 out of
1.00 a. safety; scientific
b. engineering; safety
c. safety; quality
d. engineering; scientific
The correct answer is: engineering; scientific
Question 2 Lifting tackle must be examined at least every _________months by a competent person and
Correct the results of the examination must be indicated in a book kept for this purpose.
Mark 1.00 out of
1.00 a. five
b. six
c. four
d. three
The correct answer is: three
Question 3 No person may operate a ____________ at a speed in excess of the maximum speed set by the
Incorrect manufacturer for the saw blade; or if the saw blade is damaged or dull or if the blade is not the
regular blade or correctly sharpened and set.
Mark 0.00 out of
1.00
a. power-driven bench saw
b. tilting table saw
c. set screw
d. power-driven circular saw
The correct answer is: power-driven circular saw
https://mymodules.dtls.unisa.ac.za/mod/quiz/review.php?attempt=13028827&cmid=625064 1/11
, 9/4/23, 9:54 PM Assessment 3: Attempt review
Question 4 The criteria for accreditation of the GradSaiosh is:
Correct
Mark 1.00 out of a. Grade 12 (Matric) + 3 years further study or 360 NQF credits in Occupational
1.00 Safety and at least three years of experience after completion of their NQF level
6 qualification.
b. Grade 12 (Matric)
c. Grade 12 (Matric) + 3 years further study or 360 NQF credits in Occupational Safety
and at least three years of experience after completion of their NQF level 4
qualification.
d. Grade 12 (Matric) + 1 year further study or 120 NQF credits in Occupational Safety
and at least one year of experience after completion of their NQF level 5
qualification.
The correct answer is: Grade 12 (Matric) + 3 years further study or 360 NQF credits in
Occupational Safety and at least three years of experience after completion of their NQF level
6 qualification.
Question 5 What are the microorganisms that may cause an infection, allergy, toxicity or any other danger
Correct to the health of people?
Mark 1.00 out of
1.00 a. Hazardous biological agents
b. Decontamination
c. Respiratory protective equipment
d. Personal hygiene
The correct answer is: Hazardous biological agents
Question 6 Any person who contravenes these regulations or who fails to comply with a provision of any
Correct of these regulations will be guilty of an offence and may be fined up to ______________ or
imprisoned for not more than _________________.
Mark 1.00 out of
1.00
a. R1 300; eight months
b. R1 500; ten months
c. R1 200; seven months
d. R1 000; six months
The correct answer is: R1 000; six months
Question 7 What element must have a factor of safety by indicating the maximum load that they are
Correct designed to lift with safety?
Mark 1.00 out of
1.00 a. Hatchways
b. A lifting tackle
c. Power-driven lifting machine
d. Ropes of chains
The correct answer is: Ropes of chains
https://mymodules.dtls.unisa.ac.za/mod/quiz/review.php?attempt=13028827&cmid=625064 2/11
