Auto200 level 1 bar smog inspector course study guide 2023

What are 2 types of tsi tests - 2500 rpm test; idle test What are two types of asm test - 50/15 test; 25/25 test What are the fuel caps that are used to calibrate the eis machine - Known good and bad fuel caps What types of gases are used to calibratethe E I S machine - What does dad stand for - Data acquisition device. What completed copy of the invoice must the customer receive when they drop off their vehicle for repairs? - Written estimate. What is the most important part of completed work order - Customer authorization. May a test and repair station sublet repairs? If so what repairs? - Exhaust prior to repair When performing a smog inspection the registration needs to compare to the vehicle, true or false - True Are all of the required ECS components listed on the under hood in missions label - No Part of the ecs system has been removed from the vehicle. How should this be entered in the eis? - Missing The belt is missing from the air pump. There is no visual evidence of tempering. How should it be entered into the eis? - Defective What entry should be completed if the ignition system is COP? - Not required How is nox measured in california emissions test? - You see that oil is dripping from the engine before you start your eis emission test. What should you do? - Reject vehicle before customer leaves. During the asm test the maintenance reminder light is on. What should the technician do? - Continue as normal, not a smog issue