OSHA 510 Practice Exam 100% Correct

True or False: Workplace injuries and Illnesses can lower morale and increased cost to train replacement workers - Answer (True) - Workplace Injuries and Illnesses According to "The Act, What is the mission of OSHA? - Answer (Protect American Workers) - To assure safe and healthful working conditions for working men and women by setting and enforcing standards and by providing training, outreach, education and assistance. True or False: Section 11(C) of the OSH Act States: Employers shall furnish to each employees a place of employment which are free from recognized hazards? - Answer False - Employees are protected from retaliation for raising workplace health and safety concerns and for reporting work-related injuries and illnesses with OSHA (Without Fear of Punishment) What is the Horizontal Standard? - Answer Meaning "general" or across the board True or False: OSHA directives including Enforcement and Compliance directives ensures consistent enforcement of OSHA regulations - Answer (True) - OSHA directives including (Enforcement and Compliance Directives) True or False: If not corrected and documented at time of inspection, the employers must certify that abatement is completed for each cited violation? - Answer (True) - 1903.19(c)(3) The employer's certification that abatement is complete must include, for each cited violation, in addition to the information required by paragraph (h) of this section, the date and method of abatement and a statement that affected employees and their representatives have been informed of the abatement. Define Creating Employer - Answer The employer that caused a hazardous condition that violates an OSHA standard. What is the process CSHO use when conducting and inspection? - Answer 1903.7 Present Credentials Opening Conference Walk through Closing conference True or False: Days the employee was only able to work a partial work shift is classified as restricted work activity? - Answer True - 1904.7(b)(4)(i)(A) You keep the employee from performing one or more of the routine functions of his or her job, or from working the full workday that he or she would otherwise have been scheduled to work When calculating incident rate, what does the 200,000 figure in the formula represent? - Answer The 200,000 figure in the formula represents the number of hours (100 employees working 40 hours per week, 50 weeks) per year would work, and provides the standard base for calculating incidence rates. True or False: Leading by example is a way to demonstrate management leadership and commitment to Safety and Health? - Answer True - By knowing and following the same rules your employees are expected to follow. In accordance with (IAW) 1926.20(B) having a safety and health program and job site inspections by a competent person are two main components of an employer's ____________________ ____________________ responsibilities. - Answer (Accident Prevention Responsibilities.) How far can a Class (A) fire extinguishers be away from the employees? - Answer 1926.150(c)(1)(i) A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the protected building area, or major fraction thereof. Travel distance from any point of the protected area to the nearest fire extinguisher shall not exceed (100 feet). True or False: Accident prevention signs such as danger, caution and exits signs shall be visible while working. - Answer True - 1926.200(a) General signs and symbols required by this subpart shall be (visible) at all times when work is being performed, and shall be removed or covered promptly when the hazards no longer exist. What is the maximum deceleration distance a personal fall arrest system shall bring employees to a stop? - Answer 1926.502(d)(16)(iv) bring an employee to a complete stop and limit maximum deceleration distance an employee travels to (3.5 feet) True or False: Only hand and power tools purchased by the employer must be maintained in a safe condition, - Answer False - 1926.300(a) All hand and power tools and similar equipment, whether furnished by the employer or the employee, shall be maintained in a safe condition. IAW subpart C what is the definition of Qualified Person? - Answer 1926.32(m) "Qualified" means one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his ability to solve or resolve problems relating to the subject matter, the work, or the project. How do you protect employee and other employees vision in the vicinity during Arc Welding operations? - Answer 1926.351(e) ("Shielding"). Whenever practicable, all arc welding and cutting operations shall be shielded by noncombustible or flameproof screens which will protect employees and other persons working in the vicinity from the direct rays of the arc.