NASCLA Exam Questions With 100% Correct!!
Wood plates are being laid out so that the rough openings for the doors can be located. Anchor bolts must be placed so that there is a bolt located within how many inches from the end of each section plate? - Answer 12 inches
A contractor puts in a claim under a comprehensive standard general liability policy. The policy has no additional coverage, riders, or floaters, and has a $1,000 deductible per occurrence. The claim is for a job-site accident that caused $5,000 of injuries to employees, $1,000 of injuries to a pedestrian, $3,000 damage to the contractor's equipment, and $3,000 loss of project materials purchased by the contractor. The insurance company is liable for - Answer $0.00
What is the minimum temperature to be maintained during gypsum board finishing procedures? - Answer 50 degrees
For a concrete masonry wall to be solid, all units must have at least what percentage
of its net area as solid? - Answer 75%
Metal panels that are designed to act as stressed-skin panels are attached directly to
the structural frame of the building with - Answer clips
Which phase of the value engineering process involves creating design concepts for the alternatives identified in the evaluation phase? - Answer development phase
Which is a true statement regarding the maximum construction load that can be placed on an unbraced truss? - Answer No load can be supported by an unbraced truss.
Which is true about compacting the sub-base in preparation for concrete placement?
- Answer The thinner the lift the better the compaction
Concrete is being placed during cold weather when the temperature is above 40 degrees. According to the American Concrete Institute, if the concrete is heated, which is true about the effect on the minimum curing time? - Answer 5 days is required at 50 degrees F
What is the purpose of a vapor retarder in a built-up roof system? - Answer prevent condensation from accumulating in the roof
According to OSHA, welded alloy steel chain slings shall have permanently affixed durable identification. Which specification is NOT required to be included? - Answer date manufactured
Wood plates are being laid out so that the rough openings for the doors can be located. Anchor bolts must be placed so that there is a bolt located within how many inches from the end of each section plate? - Answer 12 inches
A contractor puts in a claim under a comprehensive standard general liability policy. The policy has no additional coverage, riders, or floaters, and has a $1,000 deductible per occurrence. The claim is for a job-site accident that caused $5,000 of injuries to employees, $1,000 of injuries to a pedestrian, $3,000 damage to the contractor's equipment, and $3,000 loss of project materials purchased by the contractor. The insurance company is liable for - Answer $0.00
What is the minimum temperature to be maintained during gypsum board finishing procedures? - Answer 50 degrees
For a concrete masonry wall to be solid, all units must have at least what percentage
of its net area as solid? - Answer 75%
Metal panels that are designed to act as stressed-skin panels are attached directly to
the structural frame of the building with - Answer clips
Which phase of the value engineering process involves creating design concepts for the alternatives identified in the evaluation phase? - Answer development phase
Which is a true statement regarding the maximum construction load that can be placed on an unbraced truss? - Answer No load can be supported by an unbraced truss.
Which is true about compacting the sub-base in preparation for concrete placement?
- Answer The thinner the lift the better the compaction
Concrete is being placed during cold weather when the temperature is above 40 degrees. According to the American Concrete Institute, if the concrete is heated, which is true about the effect on the minimum curing time? - Answer 5 days is required at 50 degrees F
What is the purpose of a vapor retarder in a built-up roof system? - Answer prevent condensation from accumulating in the roof
According to OSHA, welded alloy steel chain slings shall have permanently affixed durable identification. Which specification is NOT required to be included? - Answer date manufactured
