Chapter 20 Fire 1&2 Fire Protection Systems question and answers rated A+

Chapter 20 Fire 1&2 Fire Protection Systems question and answers rated A+Fire Protection System - correct answer System designed to protect structure and minimize Fire Alarm Control Panel (FACP) - correct answer System component that receives input from automatic and manual fire alarm devices and may provide power to detection devices or communication devices. Annuciator Panel - correct answer Electronic device used to indicate the source or location of an active fire alarm initiating device or the status of the system. The panel may include lights located on a schematic map and an audible alarm signal. Fire Command Center - correct answer Designated room or area in a structure where the status of the fire detection, alarm, and protection system is displayed and the systems can be manually controlled; may be staffed or unstaffed and can be accessed by the fire department . Protected Premises System - correct answer Alarm system that alerts and notifies only occupants on the premises of the existence of a fire so that they can safely exit the building and call the fire department. If a response by a public safety agency is required, an occupant hearing the alarm must notify the agency. Noncoded alarm - correct answer the simplest type of alarm. When an alarm-initiating device, such as a smoke detector, sends a signal to the FACP, all of the alarm signaling devices operate simultaneously. Zoned/annuciated alarm - correct answer fire alarm system annuciation enables emergency responders to identify the general location of the alarm device activation Addressable alarm systems - correct answer display the location of each initiating device on the FACP or annuciator panel. Auxiliary Alarm System - correct answer system that connects the protected property with the fire department alarm communications center by a municipal master fire alarm box or over a dedicated phone line.