TCFP & GFD HAZMAT AWARENESS/OPS TEST

_____ is the flow of a hazardous material through zippers, pinholes, or other material imperfections found in chemical protective clothing - penetration ______ is placed on highway transport vehicles to identify the contents - a placard ______ is the minimum temperature at which a liquid gives off sufficient vapors to form an ignitable mixture with air. - flash point ______ is the process of taking in materials through the skin or eyes - absorption ______ materials may cause severe chemical burns and extensive tissue damage on contact. - corrosive _______ interfere with oxygen exchange during normal respiration - asphyxiants _______ is compromised of those procedures taken to keep a material in a defined or local area - confinement _______ is designed to remove contaminates that pose immediate threat to life - emergency decontamination _______ is the ratio of the weight of a volume of liquid to the weight of an equal volume of water, with water having a value of 1.0 - specific gravity ________ is the controlled burning of a liquid or gas to reduce or control the pressure and/or to dispose of the product - flaring ________ is the difference between the upper and lower flammable limits of a gas or vapor: - flammable (explosive) range ________ is the most commonly used method for decontaminating personnel - dilution/washing ________ rays are the most dangerous type of radiation. - gamma _________ radioactive materials can be packaged in small containers as well as those weighing over 100 tons? - Type B a _______ effect occurs at the point of contact with a hazardous substance. - local a _______ is best defined as a tank-within-a-tank with a stainless steel inner tank supported within a strong outer tank, with insulation in the space between the inner and outer tank: - cryogenic liquid tank car a ________ sound often occurs when metal has been softened by high heat and pressure - pinging a _________ tank has an inner tank with an outer shell and is well insulated: - cryogenic a __________ is a release that is the result of a broken or damaged valve(s) that may last from several seconds to several minutes, depending on the size of the opening, type of container, and nature of contents - rapid relief a bill of lading contains valuable information about the origin of the product and is the type of shipping paper used when transporting a product via: - highway truck a bill of lading may be located with/in the: - cab of the vehicle a carboy may be used for transporting materials containing: - corrosives a chemical reaction between two or more materials that give off heat is known as: - exothermic reaction a chemical with a vapor density of greater than 1 will tend to: - collect in low areas and below-grade places a common design feature of cylinders is a: - pressure relief valve a container labeled with a hazard class of 4 contains a(n): - flammable solid