CRITERION 2
MIA THOMPSTONE
, This light will be made out of This lamp will could cost a lot depending on The target audience of my light are This light will be made out of wire This light will have to cost quite a bit as the I think that th
wood or plastic. The wood will what I make the light out of. So if I made people from ages 20 – 30. this is why I which will be moulded into a more light is quite big, the materials for it cost as the light is
look rustic and have a slightly the light out of plastic it might cost a bit will make the lamp cool, stylish and unusual shape. The light will quite a lot and the making of the light might sensible so co
mainly be made out of triangles home to light
unfinished look about it. mire. However I think that people in my modern as that is what I think they take a while so will need lots of steps and
and squares and will have a cable will be quite b
However if I use the plastic I will target audience might preferer the plastic would like. tools which will cost a lot. material to sto
with the switch to turn the light on.
use clear plastic with a tint of so more people will buy it which means a Also the gaps at the bottom of the it.
colour [white or a primary bigger prophet. This light could be recycled if I make it light are made a bit bigger so that
colour]. I have chosen these out of plastic or wood. This could make you can change the light bulb This light is go
materials as they fit in with my it appeal to people even more and could easier and not have to struggle material it is m
get even more sold which could increase while changing the bulb. could be melt
design movement.
The light will be made out of 16 the amount of prophet. something els
triangles. Will go out at the top I think that t his light is pretty safe This light will
and will come in in the middle. The safety of this light could depend on as it has lots of gaps where the length and 10
The light will have a cord the material I make it out of. So if I make heat can escape. Because of this this big as it is
it out of wood because it is so tight in the the metal wire wont heat up and
coming off it where there will is not too big
there fore if a young family
be a light switch where you can middle the wood could get hot and if it and can not b
purchased the light it would not be light this big a
turn the light on and off. got too hot it could set on fire. However a danger to the children. There for
if I made it out of plastic the light might involved so if
The angles on the wood or the more people might want to buy too much.
just get a bit hot. the light. When making
plastic will have to be perfect or This light has been made not to This light will be made out metal wire which will be the exact mea
the triangles will not join It will give off a lot of light but not make a room feel really cosy but welded together to give a slightly un finished and too small they
together properly and if they too much light so that it burns your to light it up. This is why it would rustic look but with a clean finish and a geometric, But by throwi
don’t join together properly the the light will be about 30cm tall and 15cm wide. I eyes. Also when you turn on the be more suited of an office minimalistic and futuristic feel to it which could decreasing th
light wont look right and money have chosen this size as it is small but not that light it will make the room feel space or a big room that just also make it appeal to more people which will be wasting pr
will be lost. small that it doesn't light up the room. warm and cosy. needs lighting up increase prophet. not like so the
product.
When the light is turned on it will Because the light is made To suit the consumer the light must be This light will look like two honey comb This light will cost This light will be targ
make the room it is in, feel warm of wire it is recyclable rustic and look a bit futuristic. It needs to pods stuck together. By doing this it will somewhere around 20 – 40 I think this because p
be like this as it is what 20 – 30 year old’s give the light a feel of the out side as pounds. I have put it at this not want a light that
and cosy. It will also give off a lot there for it will appeal to well as being geometric as well. The price because it is a good fit in with their room
of light as the sides are made of more people and we will like.
The light will be about 30 – 35cm tall and light will be made out of wood which price for the light and it will different and not som
wire. get more prophet. about 15cm wide. I have made the light will also give a feel of out side to the make me some prophet as everyday.
this big because it will give off a lot of light. I think that by dong this the light well.
This light will be made out of steel will appeal to more people and I will get I think that this light
wire. The wire will either be light but still make the feel cosy, snug and environment as the m
a bigger prophet.
painted, spray painted or left with warm. of are eco friendly an
its natural colour. This will give the This light will be made out of wood that everlasting product.
This light is very safe. Even though it is will have a rustic feel to it. And a slightly
light a modern feel and this will This light will be abo
made out of metal which heats up very unfinished look about it. By doing this it
make it appeal to a lot more this tall so that it can
easily the gaps between the rods allow will make more people want to buy the
people in my target audience and if light. being different. The
more people buy the light I will get the hot air to escape and the metal 30cm in width. I have
a bigger prophet. stays cool. When manufacturing the light all the it will make them eye
cuts will have to be exactly right or the
When this light is being made all The cost of the light will be quit pieces to the light wont fit together and I think that this light
This light is made to light expensive as the materials for the the light wont work and the light will on either sides wher
of the metal rods will have to be However the space a
up the room to make the light cost quit a bit, it could cost a lot have to be through away and by doing This light will be made to
cut to the exact size to make sure a bit hot and if on for
this I will decrease my prophet as I will light up a room, look
that there are not any extra bits room feel cosy and to make lots of the light in one go and be having to buy more wood. Also the hot and could theref
unusual and eye-catching
to increase prophet and to make distressful. if I want any prophet it will have to wood will have to be sanded to look like and make the room it is in sure this doesn’t hap
it even more eco friendly. cost more. it is slightly unfinished to increase feel cosy between the lightbul
prophet.
MIA THOMPSTONE
, This light will be made out of This lamp will could cost a lot depending on The target audience of my light are This light will be made out of wire This light will have to cost quite a bit as the I think that th
wood or plastic. The wood will what I make the light out of. So if I made people from ages 20 – 30. this is why I which will be moulded into a more light is quite big, the materials for it cost as the light is
look rustic and have a slightly the light out of plastic it might cost a bit will make the lamp cool, stylish and unusual shape. The light will quite a lot and the making of the light might sensible so co
mainly be made out of triangles home to light
unfinished look about it. mire. However I think that people in my modern as that is what I think they take a while so will need lots of steps and
and squares and will have a cable will be quite b
However if I use the plastic I will target audience might preferer the plastic would like. tools which will cost a lot. material to sto
with the switch to turn the light on.
use clear plastic with a tint of so more people will buy it which means a Also the gaps at the bottom of the it.
colour [white or a primary bigger prophet. This light could be recycled if I make it light are made a bit bigger so that
colour]. I have chosen these out of plastic or wood. This could make you can change the light bulb This light is go
materials as they fit in with my it appeal to people even more and could easier and not have to struggle material it is m
get even more sold which could increase while changing the bulb. could be melt
design movement.
The light will be made out of 16 the amount of prophet. something els
triangles. Will go out at the top I think that t his light is pretty safe This light will
and will come in in the middle. The safety of this light could depend on as it has lots of gaps where the length and 10
The light will have a cord the material I make it out of. So if I make heat can escape. Because of this this big as it is
it out of wood because it is so tight in the the metal wire wont heat up and
coming off it where there will is not too big
there fore if a young family
be a light switch where you can middle the wood could get hot and if it and can not b
purchased the light it would not be light this big a
turn the light on and off. got too hot it could set on fire. However a danger to the children. There for
if I made it out of plastic the light might involved so if
The angles on the wood or the more people might want to buy too much.
just get a bit hot. the light. When making
plastic will have to be perfect or This light has been made not to This light will be made out metal wire which will be the exact mea
the triangles will not join It will give off a lot of light but not make a room feel really cosy but welded together to give a slightly un finished and too small they
together properly and if they too much light so that it burns your to light it up. This is why it would rustic look but with a clean finish and a geometric, But by throwi
don’t join together properly the the light will be about 30cm tall and 15cm wide. I eyes. Also when you turn on the be more suited of an office minimalistic and futuristic feel to it which could decreasing th
light wont look right and money have chosen this size as it is small but not that light it will make the room feel space or a big room that just also make it appeal to more people which will be wasting pr
will be lost. small that it doesn't light up the room. warm and cosy. needs lighting up increase prophet. not like so the
product.
When the light is turned on it will Because the light is made To suit the consumer the light must be This light will look like two honey comb This light will cost This light will be targ
make the room it is in, feel warm of wire it is recyclable rustic and look a bit futuristic. It needs to pods stuck together. By doing this it will somewhere around 20 – 40 I think this because p
be like this as it is what 20 – 30 year old’s give the light a feel of the out side as pounds. I have put it at this not want a light that
and cosy. It will also give off a lot there for it will appeal to well as being geometric as well. The price because it is a good fit in with their room
of light as the sides are made of more people and we will like.
The light will be about 30 – 35cm tall and light will be made out of wood which price for the light and it will different and not som
wire. get more prophet. about 15cm wide. I have made the light will also give a feel of out side to the make me some prophet as everyday.
this big because it will give off a lot of light. I think that by dong this the light well.
This light will be made out of steel will appeal to more people and I will get I think that this light
wire. The wire will either be light but still make the feel cosy, snug and environment as the m
a bigger prophet.
painted, spray painted or left with warm. of are eco friendly an
its natural colour. This will give the This light will be made out of wood that everlasting product.
This light is very safe. Even though it is will have a rustic feel to it. And a slightly
light a modern feel and this will This light will be abo
made out of metal which heats up very unfinished look about it. By doing this it
make it appeal to a lot more this tall so that it can
easily the gaps between the rods allow will make more people want to buy the
people in my target audience and if light. being different. The
more people buy the light I will get the hot air to escape and the metal 30cm in width. I have
a bigger prophet. stays cool. When manufacturing the light all the it will make them eye
cuts will have to be exactly right or the
When this light is being made all The cost of the light will be quit pieces to the light wont fit together and I think that this light
This light is made to light expensive as the materials for the the light wont work and the light will on either sides wher
of the metal rods will have to be However the space a
up the room to make the light cost quit a bit, it could cost a lot have to be through away and by doing This light will be made to
cut to the exact size to make sure a bit hot and if on for
this I will decrease my prophet as I will light up a room, look
that there are not any extra bits room feel cosy and to make lots of the light in one go and be having to buy more wood. Also the hot and could theref
unusual and eye-catching
to increase prophet and to make distressful. if I want any prophet it will have to wood will have to be sanded to look like and make the room it is in sure this doesn’t hap
it even more eco friendly. cost more. it is slightly unfinished to increase feel cosy between the lightbul
prophet.
