AHIT Electrical Exam with all Correct & 100% Verified
Answers |Actual Complete Update |Already Graded A+
How do the standards describe the inspection of a home's electrical system?
A. as an NEC code inspection
B. as a local code inspection
C. as an exhaustive technical inspection
D. as a visual inspection ✔Correct Answer-D. as a visual inspection
Which of the following actions is not a requirement regarding branch circuit wiring?
A. required to report solid conductor aluminum branch circuit wiring
B. required to observe compatibility of branch circuit wiring and its fuses or breakers
C. required to observe branch circuit conductors
D. required to dismantle connections at junction boxes ✔Correct Answer-D. required to
dismantle connections at junction boxes
Which of the following does not have to be inspected during the electrical inspection?
A. exterior fixtures and receptacles
B. polarity and grounding of receptacles
C. low voltage systems
D. branch circuit wiring ✔Correct Answer-C. low voltage systems
When electrons are made to move back and forth at 60 cycles per second, that's called _____.
A. a complete circuit
B. a transformer
C. a 120-volt circuit
D. an alternating current ✔Correct Answer-D. an alternating current
Electricity moves along wires that are known as _____.
A. raceways
B. insulators
C. conductors
D. resisters ✔Correct Answer-C. conductors
Resistance to the flow of electricity is measured in _____.
A. kilowatts
B. ohms
C. watts
D. frequencies ✔Correct Answer-B. ohms
What is resistance?
A. force that drives electrons in a current
, B. opposition of a material to the flow of electricity
C. flow of electricity
D. heat produced by the flow of electricity through a material ✔Correct Answer-B. opposition
of a material to the flow of electricity
A material with a high resistance would be a _____.
A. good conductor
B. good insulator
C. good transformer
D. good neutral wire ✔Correct Answer-B. good insulator
The electrical pressure that pushes through the wires is known as the _____.
A. voltage
B. ohm
C. amperage
D. resistance ✔Correct Answer-A. voltage
What is the measure for electromotive force?
A. amps
B. volts
C. watts
D. ohms ✔Correct Answer-B. volts
Which of the following causes electrocution?
A. power
B. electromotive force
C. resistance
D. current ✔Correct Answer-D. current
What electromotive force would it take to push 4 amps of current through a 30-ohm resistance?
A. 120 volts
B. 60 volts
C. 34 volts
D. 240 volts ✔Correct Answer-A. 120 volts
What would be the voltage rating of an electrical service with 3 wires at the mast?
A. 120/240/208-volt service
B. 120-volt service
C. 120/240-volt service
D. 240-volt service only ✔Correct Answer-C. 120/240-volt service
Which of the following is NOT an overcurrent protection device?
A. meter
B. circuit breaker
Answers |Actual Complete Update |Already Graded A+
How do the standards describe the inspection of a home's electrical system?
A. as an NEC code inspection
B. as a local code inspection
C. as an exhaustive technical inspection
D. as a visual inspection ✔Correct Answer-D. as a visual inspection
Which of the following actions is not a requirement regarding branch circuit wiring?
A. required to report solid conductor aluminum branch circuit wiring
B. required to observe compatibility of branch circuit wiring and its fuses or breakers
C. required to observe branch circuit conductors
D. required to dismantle connections at junction boxes ✔Correct Answer-D. required to
dismantle connections at junction boxes
Which of the following does not have to be inspected during the electrical inspection?
A. exterior fixtures and receptacles
B. polarity and grounding of receptacles
C. low voltage systems
D. branch circuit wiring ✔Correct Answer-C. low voltage systems
When electrons are made to move back and forth at 60 cycles per second, that's called _____.
A. a complete circuit
B. a transformer
C. a 120-volt circuit
D. an alternating current ✔Correct Answer-D. an alternating current
Electricity moves along wires that are known as _____.
A. raceways
B. insulators
C. conductors
D. resisters ✔Correct Answer-C. conductors
Resistance to the flow of electricity is measured in _____.
A. kilowatts
B. ohms
C. watts
D. frequencies ✔Correct Answer-B. ohms
What is resistance?
A. force that drives electrons in a current
, B. opposition of a material to the flow of electricity
C. flow of electricity
D. heat produced by the flow of electricity through a material ✔Correct Answer-B. opposition
of a material to the flow of electricity
A material with a high resistance would be a _____.
A. good conductor
B. good insulator
C. good transformer
D. good neutral wire ✔Correct Answer-B. good insulator
The electrical pressure that pushes through the wires is known as the _____.
A. voltage
B. ohm
C. amperage
D. resistance ✔Correct Answer-A. voltage
What is the measure for electromotive force?
A. amps
B. volts
C. watts
D. ohms ✔Correct Answer-B. volts
Which of the following causes electrocution?
A. power
B. electromotive force
C. resistance
D. current ✔Correct Answer-D. current
What electromotive force would it take to push 4 amps of current through a 30-ohm resistance?
A. 120 volts
B. 60 volts
C. 34 volts
D. 240 volts ✔Correct Answer-A. 120 volts
What would be the voltage rating of an electrical service with 3 wires at the mast?
A. 120/240/208-volt service
B. 120-volt service
C. 120/240-volt service
D. 240-volt service only ✔Correct Answer-C. 120/240-volt service
Which of the following is NOT an overcurrent protection device?
A. meter
B. circuit breaker
