CARPENTRY AND MASONRY
Exam Study Guide – Practice
Questions with Verified
Answers. GRADED A+. Latest
2026/2027 Update
A - Answer✔✔-The preparation of good qaulity lumber includes several stages.
When it is dried the process involved is ______.
A. Seasoning
B. Staining
C. Lumbering
D. Logging
C - Answer✔✔-The smallest divsion of the metric scale that you can find in the
steel rule is _____.
A. Decimeter
B. Centimeter
C. Millimeter
D. Meter
,B - Answer✔✔-What is the conversion equivalent of one inch to centimeters?
A. 25.4
B. 2.54
C. 0.254
D. 0.0254
C - Answer✔✔-Find the total number of board feet of six pieces of lumber with
a dimension of 2" x 4" x 12'.
A. 8 bd. ft.
B. 96 bd. ft.
C. 48 bd. ft.
D. 480 bd. ft.
B - Answer✔✔-A seasoned lumber is ideal for capentry works. Which among
the following is best to use?
A. Sun dried
B. Kiln dried
C. Air dried
D. Natural dried
B - Answer✔✔-There are numerous kinds of saw. When sawing along the grain
of wood the world, you need a ______.
A. Back saw
B. Cross cut saw
C. Rip saw
D. Circular saw
,A - Answer✔✔-A type of wood used for strong wood assembly. The grain of
the wood joint is not shown
A. Mosrtise and tenon
B. Dado
C. Rabbet joint
D. Lap joint
A - Answer✔✔-Activity like constructing a house or project making, plan
should be followed to maximize the use of ______.
A. Material
B. Labor
C. Tools
D. Time
D - Answer✔✔-This tool can be set to any angle. It is use to test the slope of a
beveled edge.
A. Zigzag rule
B. Ruler
C. Try square
D. Sliding T bevel
B - Answer✔✔-In measuring cylindrical object, what is appropriate tool to be
used is ___.
A. Ruler
B. Caliper
, C. Pull-push ruler
D. Meter stick
D - Answer✔✔-Fastening materials are important in woodworks. The most
common of these materials is ____.
A. Dowel
B. Plywood
C. Particle board
D. Softwood
D - Answer✔✔-A surface lumber where four of its sides are smooth or planed
is called _______.
A. S3S
B. S2S
C. Rough
D. S4S
B - Answer✔✔-Which of the following tools is used in checking the squareness
of the corners and flatness of a surface?
A. Straightedge
B. Steel square
C. Sliding T-bevel
D. Try square
C - Answer✔✔-In carpentry, splicing or joining of wood using two side blocks is
called _____.
Exam Study Guide – Practice
Questions with Verified
Answers. GRADED A+. Latest
2026/2027 Update
A - Answer✔✔-The preparation of good qaulity lumber includes several stages.
When it is dried the process involved is ______.
A. Seasoning
B. Staining
C. Lumbering
D. Logging
C - Answer✔✔-The smallest divsion of the metric scale that you can find in the
steel rule is _____.
A. Decimeter
B. Centimeter
C. Millimeter
D. Meter
,B - Answer✔✔-What is the conversion equivalent of one inch to centimeters?
A. 25.4
B. 2.54
C. 0.254
D. 0.0254
C - Answer✔✔-Find the total number of board feet of six pieces of lumber with
a dimension of 2" x 4" x 12'.
A. 8 bd. ft.
B. 96 bd. ft.
C. 48 bd. ft.
D. 480 bd. ft.
B - Answer✔✔-A seasoned lumber is ideal for capentry works. Which among
the following is best to use?
A. Sun dried
B. Kiln dried
C. Air dried
D. Natural dried
B - Answer✔✔-There are numerous kinds of saw. When sawing along the grain
of wood the world, you need a ______.
A. Back saw
B. Cross cut saw
C. Rip saw
D. Circular saw
,A - Answer✔✔-A type of wood used for strong wood assembly. The grain of
the wood joint is not shown
A. Mosrtise and tenon
B. Dado
C. Rabbet joint
D. Lap joint
A - Answer✔✔-Activity like constructing a house or project making, plan
should be followed to maximize the use of ______.
A. Material
B. Labor
C. Tools
D. Time
D - Answer✔✔-This tool can be set to any angle. It is use to test the slope of a
beveled edge.
A. Zigzag rule
B. Ruler
C. Try square
D. Sliding T bevel
B - Answer✔✔-In measuring cylindrical object, what is appropriate tool to be
used is ___.
A. Ruler
B. Caliper
, C. Pull-push ruler
D. Meter stick
D - Answer✔✔-Fastening materials are important in woodworks. The most
common of these materials is ____.
A. Dowel
B. Plywood
C. Particle board
D. Softwood
D - Answer✔✔-A surface lumber where four of its sides are smooth or planed
is called _______.
A. S3S
B. S2S
C. Rough
D. S4S
B - Answer✔✔-Which of the following tools is used in checking the squareness
of the corners and flatness of a surface?
A. Straightedge
B. Steel square
C. Sliding T-bevel
D. Try square
C - Answer✔✔-In carpentry, splicing or joining of wood using two side blocks is
called _____.
