Page 1 of 141
Alberta Landscape Applicator Certificate Practice
Exam QUESTIONS AND VERIFIED ANSWERS WITH
RATIONALES JUST RELEASED
Alberta Landscape Applicator Certificate Practice Exam
10 MOST-TESTED EXAM COVERAGE AREAS
1. Alberta Pesticide Laws, Regulations, and Applicator Responsibilities — Environmental
Protection and Enhancement Act, Pesticide (Ministerial) Regulation, applicator certification,
service registration, legal responsibilities, records, storage, transportation, and supervision.
2. Pesticide Labels and Product Information — product labels, registration information, active
ingredient, formulation, directions, rates, restricted uses, precautions, re-entry information,
environmental warnings, and label compliance.
3. Health, Safety, Toxicology, and Personal Protective Equipment — routes of exposure, toxicity,
poisoning prevention, PPE, mixing and loading safety, first aid, emergency procedures, hygiene,
and worker protection.
4. Integrated Pest Management (IPM) — pest identification, monitoring, economic or action
thresholds, prevention, cultural controls, mechanical controls, biological controls, chemical
controls, and evaluating treatment results.
5. Pesticide Application Equipment and Calibration — sprayers, nozzles, pressure, flow rate,
application speed, calibration, tank mixing, measuring products, equipment inspection, cleaning,
and preventing contamination.
6. Environmental Protection and Pesticide Drift — protection of water, soil, wildlife, pollinators,
sensitive areas, weather conditions, wind, temperature, evaporation, runoff, drift, spills, and
pesticide degradation.
7. Weed Identification and Control — annual, biennial, and perennial weeds; broadleaf and grass
weeds; weed life cycles; cultural control; mechanical control; herbicide selection; timing; and
resistance management.
8. Insect, Mite, Disease, and Other Pest Management — pest identification, insect life stages,
beneficial organisms, plant diseases, disease symptoms, fungal pathogens, mites, vertebrate
pests, and appropriate control methods.
9. Landscape and Turf Pest Management — lawns, ornamental plants, trees, shrubs, gardens,
parks, commercial grounds, plant health, turf pests, ornamental pests, disease management,
and treatment timing.
10. Application Planning, Weather, Records, and Professional Practice — site assessment,
treatment planning, weather monitoring, equipment selection, application records,
communication with clients, preventing exposure, and post-treatment evaluation.
1.
, Page 2 of 141
Before applying a commercial-class pesticide on a customer's landscape, which requirement should the
applicator confirm first?
A. The customer has purchased fertilizer
B. The applicator has the proper certification and authorization
C. The grass has been recently mowed
D. The customer has watered the lawn
Answer: B
Rationale: Commercial pesticide application requires the appropriate certification and regulatory
authorization.
2.
A landscape applicator finds several unknown weeds growing in a customer's lawn before treatment.
What should happen first?
A. Apply the strongest herbicide available
B. Increase the spray pressure
C. Correctly identify the weeds
D. Mix two herbicides together
, Page 3 of 141
Answer: C
Rationale: Correct pest identification is a basic IPM step and helps determine whether treatment is
needed.
3.
Which source provides the most important legal directions for using a registered pesticide product?
A. The customer's instructions
B. The product label
C. A sales advertisement
D. A social media post
Answer: B
Rationale: The pesticide label contains legally important directions, restrictions, precautions, and use
instructions.
4.
Why should a pesticide applicator avoid treating a landscape when strong winds could carry spray
toward a neighbor?
, Page 4 of 141
A. Wind always reduces product cost
B. Wind can increase pesticide drift and unintended exposure
C. Wind improves pesticide absorption
D. Wind increases soil moisture
Answer: B
Rationale: Wind can move pesticide droplets away from the target and expose people, property, plants,
or water.
5.
Which practice best reduces pesticide exposure while an applicator is mixing a concentrated pesticide
product?
A. Wearing appropriate PPE required by the label
B. Working without gloves for better control
C. Mixing beside a food preparation area
D. Holding the container close to the face
Answer: A
Rationale: Concentrated pesticides can create significant exposure risks during mixing and loading.
Alberta Landscape Applicator Certificate Practice
Exam QUESTIONS AND VERIFIED ANSWERS WITH
RATIONALES JUST RELEASED
Alberta Landscape Applicator Certificate Practice Exam
10 MOST-TESTED EXAM COVERAGE AREAS
1. Alberta Pesticide Laws, Regulations, and Applicator Responsibilities — Environmental
Protection and Enhancement Act, Pesticide (Ministerial) Regulation, applicator certification,
service registration, legal responsibilities, records, storage, transportation, and supervision.
2. Pesticide Labels and Product Information — product labels, registration information, active
ingredient, formulation, directions, rates, restricted uses, precautions, re-entry information,
environmental warnings, and label compliance.
3. Health, Safety, Toxicology, and Personal Protective Equipment — routes of exposure, toxicity,
poisoning prevention, PPE, mixing and loading safety, first aid, emergency procedures, hygiene,
and worker protection.
4. Integrated Pest Management (IPM) — pest identification, monitoring, economic or action
thresholds, prevention, cultural controls, mechanical controls, biological controls, chemical
controls, and evaluating treatment results.
5. Pesticide Application Equipment and Calibration — sprayers, nozzles, pressure, flow rate,
application speed, calibration, tank mixing, measuring products, equipment inspection, cleaning,
and preventing contamination.
6. Environmental Protection and Pesticide Drift — protection of water, soil, wildlife, pollinators,
sensitive areas, weather conditions, wind, temperature, evaporation, runoff, drift, spills, and
pesticide degradation.
7. Weed Identification and Control — annual, biennial, and perennial weeds; broadleaf and grass
weeds; weed life cycles; cultural control; mechanical control; herbicide selection; timing; and
resistance management.
8. Insect, Mite, Disease, and Other Pest Management — pest identification, insect life stages,
beneficial organisms, plant diseases, disease symptoms, fungal pathogens, mites, vertebrate
pests, and appropriate control methods.
9. Landscape and Turf Pest Management — lawns, ornamental plants, trees, shrubs, gardens,
parks, commercial grounds, plant health, turf pests, ornamental pests, disease management,
and treatment timing.
10. Application Planning, Weather, Records, and Professional Practice — site assessment,
treatment planning, weather monitoring, equipment selection, application records,
communication with clients, preventing exposure, and post-treatment evaluation.
1.
, Page 2 of 141
Before applying a commercial-class pesticide on a customer's landscape, which requirement should the
applicator confirm first?
A. The customer has purchased fertilizer
B. The applicator has the proper certification and authorization
C. The grass has been recently mowed
D. The customer has watered the lawn
Answer: B
Rationale: Commercial pesticide application requires the appropriate certification and regulatory
authorization.
2.
A landscape applicator finds several unknown weeds growing in a customer's lawn before treatment.
What should happen first?
A. Apply the strongest herbicide available
B. Increase the spray pressure
C. Correctly identify the weeds
D. Mix two herbicides together
, Page 3 of 141
Answer: C
Rationale: Correct pest identification is a basic IPM step and helps determine whether treatment is
needed.
3.
Which source provides the most important legal directions for using a registered pesticide product?
A. The customer's instructions
B. The product label
C. A sales advertisement
D. A social media post
Answer: B
Rationale: The pesticide label contains legally important directions, restrictions, precautions, and use
instructions.
4.
Why should a pesticide applicator avoid treating a landscape when strong winds could carry spray
toward a neighbor?
, Page 4 of 141
A. Wind always reduces product cost
B. Wind can increase pesticide drift and unintended exposure
C. Wind improves pesticide absorption
D. Wind increases soil moisture
Answer: B
Rationale: Wind can move pesticide droplets away from the target and expose people, property, plants,
or water.
5.
Which practice best reduces pesticide exposure while an applicator is mixing a concentrated pesticide
product?
A. Wearing appropriate PPE required by the label
B. Working without gloves for better control
C. Mixing beside a food preparation area
D. Holding the container close to the face
Answer: A
Rationale: Concentrated pesticides can create significant exposure risks during mixing and loading.
