AUXSEA EXAM STUDYGUIDE EXAM NEWEST
2026/2027 QUESTIONS and CORRECT
DETAILED ANSWERS ALREADY GRADED A+
A fiberglass hull is composed of - CORRECT ANSWER-fiberglass strands and
layers saturated with resin.
List the four types of fiberglass reinforcing materials: - CORRECT ANSWER-1.
Fiberglass Mat
2. Fiberglass Cloth
3. Woven Roven
4. Chopped Strands
The hand-layup and chopped-strand processes are used in a - CORRECT
ANSWER-cavity mold.
In the hand-layup and chopped-strand processes, - CORRECT ANSWER-the gel
coat is applied to the inside of the mold first.
,In the matched-die method, - CORRECT ANSWER-the male and female molds
are clamped together with a laminate between.
What core materials are used in sandwich construction? - CORRECT ANSWER-
Balsa wood Foamed Plastic Plywood
List the advantages of fiberglass-built boats. - CORRECT ANSWER-Fiberglass is:
Impervious to marine borers. No seams or joints to leak. Color can be molded into
the boat. Boats can be extremely strong. Fiberglass can be molded into almost
any shape.
List the disadvantages of fiberglass-built boats. - CORRECT ANSWER-Fiberglass
is heavier than water Fiberglass hulls are very heavy Easy to cover shoddy
workmanship
The two types of resins used in fiberglass construction are - CORRECT
ANSWER-polyester and epoxy.
There are many substances added to boat building resins. - CORRECT
ANSWER-They are used to harden the resin, control curing time and make the
resin fire retardant.
,A male mold is known as a - CORRECT ANSWER-plug.
A female mold is known as a - CORRECT ANSWER-cavity mold.
What are the two general classes of wood? - CORRECT ANSWER-Hardwood
Softwood.
What are the principal considerations in the selection of various types of wood for
boat building? - CORRECT ANSWER-Strength Decay resistance Availability
List the advantages of steel for boat building. - CORRECT ANSWER-Higher
strength-to-weight ratio than fiberglass, Highest strength-to-weight ration, High
resistance to impact, Abrasion and fatigue resistance, Less noisy than all but
wood, Resistant to fire.
The disadvantage of steel for boat building is that - CORRECT ANSWER-it
deteriorates easily without proper maintenance.
Why must you put a layer of nonmetallic paint between the hull of an aluminum
boat and a layer of copper bottom paint? - CORRECT ANSWER-Galvanic action
, will corrode the hull if the aluminum and copper touch. Note: Copper bottom
paint is now illegal and not used.
List the advantages of aluminum for boat building. Aluminum is: - CORRECT
ANSWER-lightweight impervious to marine borers.
List the disadvantages of aluminum for boat building. - CORRECT ANSWER-It is
a good heat conductor so aluminum hulls sweat, It has a relatively low melting
point and melts sooner than steel if there is a fire. It is noisy.
The six types of steering systems are: - CORRECT ANSWER-Tiller Drum and
Cable Sprocket and Chain Rack and Pinion Gear and Shaft Hydraulic
The simplest steering system is - CORRECT ANSWER-the tiller.
The curve or sweep of the deck of a vessel when viewed from the side is -
CORRECT ANSWER-the sheer.
The outward curvature of the sides of the boat near the bow that is used to keep
the deck drier is called - CORRECT ANSWER-the flare.
2026/2027 QUESTIONS and CORRECT
DETAILED ANSWERS ALREADY GRADED A+
A fiberglass hull is composed of - CORRECT ANSWER-fiberglass strands and
layers saturated with resin.
List the four types of fiberglass reinforcing materials: - CORRECT ANSWER-1.
Fiberglass Mat
2. Fiberglass Cloth
3. Woven Roven
4. Chopped Strands
The hand-layup and chopped-strand processes are used in a - CORRECT
ANSWER-cavity mold.
In the hand-layup and chopped-strand processes, - CORRECT ANSWER-the gel
coat is applied to the inside of the mold first.
,In the matched-die method, - CORRECT ANSWER-the male and female molds
are clamped together with a laminate between.
What core materials are used in sandwich construction? - CORRECT ANSWER-
Balsa wood Foamed Plastic Plywood
List the advantages of fiberglass-built boats. - CORRECT ANSWER-Fiberglass is:
Impervious to marine borers. No seams or joints to leak. Color can be molded into
the boat. Boats can be extremely strong. Fiberglass can be molded into almost
any shape.
List the disadvantages of fiberglass-built boats. - CORRECT ANSWER-Fiberglass
is heavier than water Fiberglass hulls are very heavy Easy to cover shoddy
workmanship
The two types of resins used in fiberglass construction are - CORRECT
ANSWER-polyester and epoxy.
There are many substances added to boat building resins. - CORRECT
ANSWER-They are used to harden the resin, control curing time and make the
resin fire retardant.
,A male mold is known as a - CORRECT ANSWER-plug.
A female mold is known as a - CORRECT ANSWER-cavity mold.
What are the two general classes of wood? - CORRECT ANSWER-Hardwood
Softwood.
What are the principal considerations in the selection of various types of wood for
boat building? - CORRECT ANSWER-Strength Decay resistance Availability
List the advantages of steel for boat building. - CORRECT ANSWER-Higher
strength-to-weight ratio than fiberglass, Highest strength-to-weight ration, High
resistance to impact, Abrasion and fatigue resistance, Less noisy than all but
wood, Resistant to fire.
The disadvantage of steel for boat building is that - CORRECT ANSWER-it
deteriorates easily without proper maintenance.
Why must you put a layer of nonmetallic paint between the hull of an aluminum
boat and a layer of copper bottom paint? - CORRECT ANSWER-Galvanic action
, will corrode the hull if the aluminum and copper touch. Note: Copper bottom
paint is now illegal and not used.
List the advantages of aluminum for boat building. Aluminum is: - CORRECT
ANSWER-lightweight impervious to marine borers.
List the disadvantages of aluminum for boat building. - CORRECT ANSWER-It is
a good heat conductor so aluminum hulls sweat, It has a relatively low melting
point and melts sooner than steel if there is a fire. It is noisy.
The six types of steering systems are: - CORRECT ANSWER-Tiller Drum and
Cable Sprocket and Chain Rack and Pinion Gear and Shaft Hydraulic
The simplest steering system is - CORRECT ANSWER-the tiller.
The curve or sweep of the deck of a vessel when viewed from the side is -
CORRECT ANSWER-the sheer.
The outward curvature of the sides of the boat near the bow that is used to keep
the deck drier is called - CORRECT ANSWER-the flare.
