Occupational Safety Specialist
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationale 2026 Q&A| Instant
Download Pdf
1. Which principle is the primary purpose of an occupational safety
management system?
A. Increasing employee workload
B. Reducing production costs only
C. Preventing workplace injuries and illnesses through systematic control
of hazards
D. Eliminating all workplace documentation
A safety management system focuses on identifying hazards, assessing
risks, and implementing controls to protect workers.
2. The most effective method in the hierarchy of controls is:
A. Personal protective equipment
B. Administrative controls
C. Warning signs
D. Elimination of the hazard
,Elimination removes the hazard completely and is considered the most
effective control measure.
3. A workplace hazard assessment should primarily identify:
A. Employee salaries
B. Potential sources of harm and associated risks
C. Company profits
D. Customer preferences
Hazard assessments identify unsafe conditions and practices that may
cause injury or illness.
4. Which organization publishes occupational safety standards in the
United States?
A. EPA
B. FDA
C. Occupational Safety and Health Administration (OSHA)
D. DOT
OSHA establishes and enforces workplace safety regulations in the United
States.
5. The main purpose of a safety inspection is to:
A. Punish employees
B. Increase paperwork
C. Identify unsafe conditions and recommend corrective actions
D. Replace employee training
Safety inspections detect hazards before they result in incidents.
6. Which type of hazard involves exposure to bacteria, viruses, or fungi?
A. Chemical hazard
B. Physical hazard
, C. Ergonomic hazard
D. Biological hazard
Biological hazards arise from living organisms capable of causing disease.
7. The first step in conducting a risk assessment is:
A. Selecting PPE
B. Identifying hazards
C. Writing reports
D. Training workers
Hazards must be identified before risks can be evaluated and controlled.
8. Which control reduces worker exposure by changing work
procedures?
A. Elimination
B. Substitution
C. Engineering control
D. Administrative control
Administrative controls modify policies, procedures, or schedules to reduce
exposure.
9. A near miss is:
A. A confirmed injury
B. A safety violation with no potential harm
C. An incident that could have caused injury but did not
D. A completed accident investigation
Near misses provide opportunities to correct hazards before injuries occur.
10. Safety data sheets provide information about:
A. Employee attendance
B. Chemical hazards, handling, and emergency measures
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationale 2026 Q&A| Instant
Download Pdf
1. Which principle is the primary purpose of an occupational safety
management system?
A. Increasing employee workload
B. Reducing production costs only
C. Preventing workplace injuries and illnesses through systematic control
of hazards
D. Eliminating all workplace documentation
A safety management system focuses on identifying hazards, assessing
risks, and implementing controls to protect workers.
2. The most effective method in the hierarchy of controls is:
A. Personal protective equipment
B. Administrative controls
C. Warning signs
D. Elimination of the hazard
,Elimination removes the hazard completely and is considered the most
effective control measure.
3. A workplace hazard assessment should primarily identify:
A. Employee salaries
B. Potential sources of harm and associated risks
C. Company profits
D. Customer preferences
Hazard assessments identify unsafe conditions and practices that may
cause injury or illness.
4. Which organization publishes occupational safety standards in the
United States?
A. EPA
B. FDA
C. Occupational Safety and Health Administration (OSHA)
D. DOT
OSHA establishes and enforces workplace safety regulations in the United
States.
5. The main purpose of a safety inspection is to:
A. Punish employees
B. Increase paperwork
C. Identify unsafe conditions and recommend corrective actions
D. Replace employee training
Safety inspections detect hazards before they result in incidents.
6. Which type of hazard involves exposure to bacteria, viruses, or fungi?
A. Chemical hazard
B. Physical hazard
, C. Ergonomic hazard
D. Biological hazard
Biological hazards arise from living organisms capable of causing disease.
7. The first step in conducting a risk assessment is:
A. Selecting PPE
B. Identifying hazards
C. Writing reports
D. Training workers
Hazards must be identified before risks can be evaluated and controlled.
8. Which control reduces worker exposure by changing work
procedures?
A. Elimination
B. Substitution
C. Engineering control
D. Administrative control
Administrative controls modify policies, procedures, or schedules to reduce
exposure.
9. A near miss is:
A. A confirmed injury
B. A safety violation with no potential harm
C. An incident that could have caused injury but did not
D. A completed accident investigation
Near misses provide opportunities to correct hazards before injuries occur.
10. Safety data sheets provide information about:
A. Employee attendance
B. Chemical hazards, handling, and emergency measures
