FTE 217 2026/2027 Exam
Questions and Correct
Answers | New Update
The reason there are few "forge shops" that handle the AR market is
because: - ANSWER ✔✔other "forge shops" found that the AR work
was a marginal part of their business and their time and resources were
better spent elsewhere.
The 5.56 NATO chamber has a longer ______ than a .223 Remington
chamber to allow for the increased pressures in the 5.56 NATO
cartridge. - ANSWER ✔✔throat
, The problem with the AR (AR-15, AR-10, and AR9) platform is that all of
the components, no matter how small they are, are purpose-built and
you cannot source them from anywhere else, other than from an
authorized dealer. - ANSWER ✔✔false
"MIL-SPEC", which is short for "military specification", is the lowest
allowable standard for something to be accepted into the military. -
ANSWER ✔✔true
The projectile of the .22LR cartridge fits a barrel with a nominal
_________________-inch diameter bore, while the .223/5.56 is
designed for a bore with the nominal diameter of .224. - ANSWER
✔✔.221
The bolt catch: - ANSWER ✔✔holds the bolt in the open position.
Excessive _______ within the casing/chamber can dislodge primers. -
ANSWER ✔✔pressure
In the AR9, or in ARs that have been converted to chamber the 9mm
and .22LR cartridges, the gas system required for the AR-15 is no longer
needed, however, other adjustments to certain components will need to
be made. - ANSWER ✔✔true
Questions and Correct
Answers | New Update
The reason there are few "forge shops" that handle the AR market is
because: - ANSWER ✔✔other "forge shops" found that the AR work
was a marginal part of their business and their time and resources were
better spent elsewhere.
The 5.56 NATO chamber has a longer ______ than a .223 Remington
chamber to allow for the increased pressures in the 5.56 NATO
cartridge. - ANSWER ✔✔throat
, The problem with the AR (AR-15, AR-10, and AR9) platform is that all of
the components, no matter how small they are, are purpose-built and
you cannot source them from anywhere else, other than from an
authorized dealer. - ANSWER ✔✔false
"MIL-SPEC", which is short for "military specification", is the lowest
allowable standard for something to be accepted into the military. -
ANSWER ✔✔true
The projectile of the .22LR cartridge fits a barrel with a nominal
_________________-inch diameter bore, while the .223/5.56 is
designed for a bore with the nominal diameter of .224. - ANSWER
✔✔.221
The bolt catch: - ANSWER ✔✔holds the bolt in the open position.
Excessive _______ within the casing/chamber can dislodge primers. -
ANSWER ✔✔pressure
In the AR9, or in ARs that have been converted to chamber the 9mm
and .22LR cartridges, the gas system required for the AR-15 is no longer
needed, however, other adjustments to certain components will need to
be made. - ANSWER ✔✔true
