DISPENSING LP-GAS SAFELY IN TEXAS
QUESTIONS AND ANSWERS WITH
COMPLETE SOLUTIONS 100%
CORRECT!!!
Question 1
It is the ________ responsibility to understand the regulations and operations
of the dispensing equipment.
Answer: Operator's (or Dispenser Operator's)
Question 2
A ________ ________ must be done on every cylinder before it can be filled to
ensure that it is safe for filling.
Answer: Visual inspection
Question 3
Always make sure a cylinder is filled to its proper level to avoid ________.
Answer: Overfilling (beyond 80% liquid capacity)
Question 4
It is also the operator's responsibility to educate the ________.
Answer: Customer (on safe propane handling, transportation, and storage
rules)
always transport & store a cylinder in a ____ ____ position so it will not fall shift
or roll -ANSWER ✔✔secure upright
never store cylinders inside a ____ ____ -ANSWER ✔✔hot vehicle
remind customer to always proceed directly to their ____ and immediately ____
the cylinder from their vehicle -ANSWER ✔✔destination
remove
wearing ____ ____ helps reduce the chance of producing a static spark -ANSWER
✔✔cotton blend
____ is an information bulletin that alerts you to properties and health hazards of
propane -ANSWER ✔✔MSDS
____ is added to propane to increase the likelihood that a leak will be detected -
ANSWER ✔✔odorant
, liquid propane will ____ when heat is added to it -ANSWER ✔✔expand
in order to allow for liquid expansion propane cylinders are only filled to ____ %
of their capacity -ANSWER ✔✔80
propane liquid released into the air will expand to ____ times it's original volume -
ANSWER ✔✔270
____ and ____ ____ are 2 types of PPE required when filling containers because of
the refrigerating effect of liquid propane -ANSWER ✔✔gloves
safety glasses
gloves & safety glasses are required when filling containers because of the ____
____ of the liquid propane -ANSWER ✔✔refrigerating effect
a proper mixture of propane vapor, air and an ____ ____ is needed for propane to
burn -ANSWER ✔✔ignition source
OSHA requires that employees are trained on fire extinguisher use immediately
upon hiring & ____ there after -ANSWER ✔✔annually
all fire extinguishers require a ____ visual inspection -ANSWER ✔✔monthly
most propane dispensers include a ____ ____ ____ that supplies propane to the
dispensing equipment -ANSWER ✔✔ASME storage tank
when filling a cylinder by ____ using a fixed maximum liquid level gauge, the
process relies on the ____ to determine when the maximum permitted filling for a
cylinder is reached -ANSWER ✔✔volume
operator
____ ____ stations is used to provide an additional level of emergency shutdown
capability -ANSWER ✔✔remote shutdown
platform balance beam scales must bear ____ ____ -ANSWER ✔✔certification
decals
QUESTIONS AND ANSWERS WITH
COMPLETE SOLUTIONS 100%
CORRECT!!!
Question 1
It is the ________ responsibility to understand the regulations and operations
of the dispensing equipment.
Answer: Operator's (or Dispenser Operator's)
Question 2
A ________ ________ must be done on every cylinder before it can be filled to
ensure that it is safe for filling.
Answer: Visual inspection
Question 3
Always make sure a cylinder is filled to its proper level to avoid ________.
Answer: Overfilling (beyond 80% liquid capacity)
Question 4
It is also the operator's responsibility to educate the ________.
Answer: Customer (on safe propane handling, transportation, and storage
rules)
always transport & store a cylinder in a ____ ____ position so it will not fall shift
or roll -ANSWER ✔✔secure upright
never store cylinders inside a ____ ____ -ANSWER ✔✔hot vehicle
remind customer to always proceed directly to their ____ and immediately ____
the cylinder from their vehicle -ANSWER ✔✔destination
remove
wearing ____ ____ helps reduce the chance of producing a static spark -ANSWER
✔✔cotton blend
____ is an information bulletin that alerts you to properties and health hazards of
propane -ANSWER ✔✔MSDS
____ is added to propane to increase the likelihood that a leak will be detected -
ANSWER ✔✔odorant
, liquid propane will ____ when heat is added to it -ANSWER ✔✔expand
in order to allow for liquid expansion propane cylinders are only filled to ____ %
of their capacity -ANSWER ✔✔80
propane liquid released into the air will expand to ____ times it's original volume -
ANSWER ✔✔270
____ and ____ ____ are 2 types of PPE required when filling containers because of
the refrigerating effect of liquid propane -ANSWER ✔✔gloves
safety glasses
gloves & safety glasses are required when filling containers because of the ____
____ of the liquid propane -ANSWER ✔✔refrigerating effect
a proper mixture of propane vapor, air and an ____ ____ is needed for propane to
burn -ANSWER ✔✔ignition source
OSHA requires that employees are trained on fire extinguisher use immediately
upon hiring & ____ there after -ANSWER ✔✔annually
all fire extinguishers require a ____ visual inspection -ANSWER ✔✔monthly
most propane dispensers include a ____ ____ ____ that supplies propane to the
dispensing equipment -ANSWER ✔✔ASME storage tank
when filling a cylinder by ____ using a fixed maximum liquid level gauge, the
process relies on the ____ to determine when the maximum permitted filling for a
cylinder is reached -ANSWER ✔✔volume
operator
____ ____ stations is used to provide an additional level of emergency shutdown
capability -ANSWER ✔✔remote shutdown
platform balance beam scales must bear ____ ____ -ANSWER ✔✔certification
decals
