ipc j-std-001G
Conductor Diameter
the outdoor diameter of twine,stranded or strong, w/o the insulation
Wire Diameter
the outdoor diameter of cord, stranded or strong, with insulation if gift
Disposition
The willpower of the way defects need to be handled.
Electrical Clearance
The minimal spacing between noncommon uninsulated conductors.
FOD (Foreign Object Debris)
A substance, debris, particulate be counted or article alien to the assembly or gadget.
High Voltage
Varies via design and application.
Manufacturer (Assembler)
Individual, employer, or agency accountable for the meeting manner and verification operations
essential to make certain full compliance.
Objective Evidence
Documentation within the form of hard reproduction, computer facts, video, that demonstrates
the necessities inside the Standard were met.
Process Control
A system or approach to constantly steer an operation in reducing variant within the techniques.
, Proficiency
The capability to perform obligations in accordance with the necessities and verification
procedures.
Solder Destination Side
The facet of the PCB that the solder flows in the direction of in a plated through-hollow
application.
Solder Source Side
The facet of the PCB to which solder is carried out.
Supplier
The man or woman, business enterprise or organisation which offers the Manufacturer additives
and/or substances.
User
The individual, organisation, organisation, contractually special authority, or business enterprise
accountable for the procurement or design of electrical/electronic hardware, and having the
authority to outline the elegance of equipment and any variation or regulations to the
requirements of this Standard.
Wire Overwrap
occurs when a twine/lead is wrapped greater than 360" and remains in contact with the terminal
submit.
Wire Overlap
occurs when a twine/lead is wrapped greater than 360° and crosses over itself, does now not
continue to be in contact with the terminal put up.
Requirement Flowdown
Standard is contractually required, the relevant necessities of this Standard shall [D1D2D3] be
imposed on all applicable subcontracts, meeting drawing(s), documentation and buy orders.
Personnel Proficiency
Conductor Diameter
the outdoor diameter of twine,stranded or strong, w/o the insulation
Wire Diameter
the outdoor diameter of cord, stranded or strong, with insulation if gift
Disposition
The willpower of the way defects need to be handled.
Electrical Clearance
The minimal spacing between noncommon uninsulated conductors.
FOD (Foreign Object Debris)
A substance, debris, particulate be counted or article alien to the assembly or gadget.
High Voltage
Varies via design and application.
Manufacturer (Assembler)
Individual, employer, or agency accountable for the meeting manner and verification operations
essential to make certain full compliance.
Objective Evidence
Documentation within the form of hard reproduction, computer facts, video, that demonstrates
the necessities inside the Standard were met.
Process Control
A system or approach to constantly steer an operation in reducing variant within the techniques.
, Proficiency
The capability to perform obligations in accordance with the necessities and verification
procedures.
Solder Destination Side
The facet of the PCB that the solder flows in the direction of in a plated through-hollow
application.
Solder Source Side
The facet of the PCB to which solder is carried out.
Supplier
The man or woman, business enterprise or organisation which offers the Manufacturer additives
and/or substances.
User
The individual, organisation, organisation, contractually special authority, or business enterprise
accountable for the procurement or design of electrical/electronic hardware, and having the
authority to outline the elegance of equipment and any variation or regulations to the
requirements of this Standard.
Wire Overwrap
occurs when a twine/lead is wrapped greater than 360" and remains in contact with the terminal
submit.
Wire Overlap
occurs when a twine/lead is wrapped greater than 360° and crosses over itself, does now not
continue to be in contact with the terminal put up.
Requirement Flowdown
Standard is contractually required, the relevant necessities of this Standard shall [D1D2D3] be
imposed on all applicable subcontracts, meeting drawing(s), documentation and buy orders.
Personnel Proficiency
