AUMT 1416SEC1 Exam Questions Part 3 Questions with Correct Answers
Question 1:
Unitized vehicle bodies have these special features and applications:
Answer:
Unitized bodies have a steel box around the passenger compartment
Question 2:
A semi-independent rear suspension system has:
Answer:
A rear axle with an inverted steel U-section containing a tubular stabilizer bar.
Question 3:
All of these statements about recirculating ball steering gears are true EXCEPT: Ball bearings are
mounted between the worm gear and the ball nut.
The lower end of the sector shaft is splined to the idler arm.
As the steering wheel is turned, the ball nut moves upward or downward on the worm gear.
The steering shaft is attached to the worm gear.
Answer:
B. the lower end of the sector shaft is splined to the idler arm
Question 4:
Proper wheel alignment is extremely important to provide:
Answer:
Steering Control
Question 5:
Excessive rear wheel toe-out on the left rear wheel causes:
Answer:
Steering pull to the right
, Question 6:
In a parallelogram steering linkage, the tie rods are parallel to the:
Answer:
Lower Control Arms
Question 7:
A thrust-type bearing load is applied in a:
Answer:
Horizontal Direction
Question 8:
All of these statements about wheel rims are true EXCEPT:
Wheel rims must position the tires at the proper distance inward or outward from the vertical
wheel mounting surface.
A wheel rim with a positive offset has the center of the tire positioned inboard from the vertical
wheel mounting surface.
A wheel rim with a neutral offset has the center of the tire positioned at the vertical center of
the brake rotor.
A wheel rim with a negative offset has the center of the tire positioned outboard from the
vertical wheel mounting surface.
Answer:
C. A wheel rim with a neutral offset has the center of the tire positioned at the vertical center
of the brake rotor
Question 9:
Shock absorbers control spring action and help to prevent:
Answer:
Wheel oscillations
Question 10:
The purpose of the upper and lower control arms in a short-and-long arm front suspension
system is to:
Answer:
Question 1:
Unitized vehicle bodies have these special features and applications:
Answer:
Unitized bodies have a steel box around the passenger compartment
Question 2:
A semi-independent rear suspension system has:
Answer:
A rear axle with an inverted steel U-section containing a tubular stabilizer bar.
Question 3:
All of these statements about recirculating ball steering gears are true EXCEPT: Ball bearings are
mounted between the worm gear and the ball nut.
The lower end of the sector shaft is splined to the idler arm.
As the steering wheel is turned, the ball nut moves upward or downward on the worm gear.
The steering shaft is attached to the worm gear.
Answer:
B. the lower end of the sector shaft is splined to the idler arm
Question 4:
Proper wheel alignment is extremely important to provide:
Answer:
Steering Control
Question 5:
Excessive rear wheel toe-out on the left rear wheel causes:
Answer:
Steering pull to the right
, Question 6:
In a parallelogram steering linkage, the tie rods are parallel to the:
Answer:
Lower Control Arms
Question 7:
A thrust-type bearing load is applied in a:
Answer:
Horizontal Direction
Question 8:
All of these statements about wheel rims are true EXCEPT:
Wheel rims must position the tires at the proper distance inward or outward from the vertical
wheel mounting surface.
A wheel rim with a positive offset has the center of the tire positioned inboard from the vertical
wheel mounting surface.
A wheel rim with a neutral offset has the center of the tire positioned at the vertical center of
the brake rotor.
A wheel rim with a negative offset has the center of the tire positioned outboard from the
vertical wheel mounting surface.
Answer:
C. A wheel rim with a neutral offset has the center of the tire positioned at the vertical center
of the brake rotor
Question 9:
Shock absorbers control spring action and help to prevent:
Answer:
Wheel oscillations
Question 10:
The purpose of the upper and lower control arms in a short-and-long arm front suspension
system is to:
Answer:
