Arizona Statutes and Rules Examination (SRE) Practice Questions
100% Verified Answers with Rationales for 2026
QUESTION 1
According to A.R.S. § 32-1602(A), which of the following is the correct composition of
the Arizona State Board of Nursing?
A) 5 Registered Nurses, 3 Licensed Practical Nurses, 2 Public Members, 1 Nursing
Assistant
B) 6 Registered Nurses, 2 Licensed Practical Nurses, 2 Public Members, 1 Nursing
Assistant or Educator
C) 7 Registered Nurses, 1 Licensed Practical Nurse, 2 Public Members, 1 Nursing
Assistant
D) 4 Registered Nurses, 3 Licensed Practical Nurses, 3 Public Members, 1 Nursing
Assistant
Answer: B) 6 Registered Nurses, 2 Licensed Practical Nurses, 2 Public Members, 1
Nursing Assistant or Educator
Rationale: A.R.S. § 32-1602(A) establishes the Board with 11 members: six registered
nurses (including at least one APRN, CNS, or CRNA), two licensed practical nurses, two
public members, and one nursing assistant or nursing assistant educator .
QUESTION 2
Under Arizona Administrative Code R4-9-106(A)(1), the Statutes and Rules Examination
(SRE) is designed to test the qualifying party's knowledge of all of the following EXCEPT:
,A) Building, safety, health, and lien laws of the state
B) Administrative principles of the contracting business
C) Rules adopted by the Registrar
D) Technical skills in the specific trade classification
Answer: D) Technical skills in the specific trade classification
Rationale: R4-9-106(A)(1) specifies that the SRE addresses knowledge of
building/safety/health/lien laws, administrative principles, and Registrar's rules. Technical
trade skills are tested on the separate Trade Examination, not the SRE .
QUESTION 3
According to R4-9-106(C), what is the minimum passing score required on each
examination for a contractor's license?
A) 60%
B) 65%
C) 70%
D) 75%
Answer: C) 70%
Rationale: R4-9-106(C) explicitly requires a grade of at least 70% on each required
examination, including the Statutes and Rules Examination and the Trade Examination .
QUESTION 4
,Under R4-9-106(D), how long must a qualifying party wait to retake an examination
after the first failure?
A) 15 calendar days
B) 30 calendar days
C) 60 calendar days
D) 90 calendar days
Answer: B) 30 calendar days
Rationale: R4-9-106(D)(1) requires a 30-calendar-day waiting period after the first
examination failure. The same 30-day period applies after a second failure, with a 90-day
wait required for any subsequent failures .
QUESTION 5
Under R4-9-106(B), how frequently must the Registrar of Contractors administer the SRE
and Trade Examinations?
A) At least once a month
B) At least once every two weeks
C) At least once a week
D) On demand only
Answer: C) At least once a week
Rationale: R4-9-106(B) mandates that the Registrar, or a contracted testing service, must
administer examinations at least once a week .
, QUESTION 6
According to R4-9-106(A)(2), the Trade Examination addresses the qualifying party's
knowledge of all the following EXCEPT:
A) Construction plans and specifications applicable to the industry
B) Standards of construction work and techniques in the industry
C) Administrative principles of the contracting business
D) General understanding of other related construction trades
Answer: C) Administrative principles of the contracting business
Rationale: R4-9-106(A)(2) lists qualification in the kind of work, knowledge of
plans/specifications, standards of construction work, and general understanding of related
trades. Administrative principles are covered in the SRE, not the Trade Examination .
QUESTION 7
According to R4-9-106(E)(1), the Registrar may waive the trade examination requirement
for a qualifying party from another state if they have been licensed in a comparable
classification within the preceding:
A) 1 year
B) 3 years
C) 5 years
D) 10 years
Answer: C) 5 years
Rationale: R4-9-106(E)(1)(b) allows waiver if records show the qualifying party is currently
or has previously been a qualifying party for a licensee in another state in the same or
comparable classification within the preceding five years .
100% Verified Answers with Rationales for 2026
QUESTION 1
According to A.R.S. § 32-1602(A), which of the following is the correct composition of
the Arizona State Board of Nursing?
A) 5 Registered Nurses, 3 Licensed Practical Nurses, 2 Public Members, 1 Nursing
Assistant
B) 6 Registered Nurses, 2 Licensed Practical Nurses, 2 Public Members, 1 Nursing
Assistant or Educator
C) 7 Registered Nurses, 1 Licensed Practical Nurse, 2 Public Members, 1 Nursing
Assistant
D) 4 Registered Nurses, 3 Licensed Practical Nurses, 3 Public Members, 1 Nursing
Assistant
Answer: B) 6 Registered Nurses, 2 Licensed Practical Nurses, 2 Public Members, 1
Nursing Assistant or Educator
Rationale: A.R.S. § 32-1602(A) establishes the Board with 11 members: six registered
nurses (including at least one APRN, CNS, or CRNA), two licensed practical nurses, two
public members, and one nursing assistant or nursing assistant educator .
QUESTION 2
Under Arizona Administrative Code R4-9-106(A)(1), the Statutes and Rules Examination
(SRE) is designed to test the qualifying party's knowledge of all of the following EXCEPT:
,A) Building, safety, health, and lien laws of the state
B) Administrative principles of the contracting business
C) Rules adopted by the Registrar
D) Technical skills in the specific trade classification
Answer: D) Technical skills in the specific trade classification
Rationale: R4-9-106(A)(1) specifies that the SRE addresses knowledge of
building/safety/health/lien laws, administrative principles, and Registrar's rules. Technical
trade skills are tested on the separate Trade Examination, not the SRE .
QUESTION 3
According to R4-9-106(C), what is the minimum passing score required on each
examination for a contractor's license?
A) 60%
B) 65%
C) 70%
D) 75%
Answer: C) 70%
Rationale: R4-9-106(C) explicitly requires a grade of at least 70% on each required
examination, including the Statutes and Rules Examination and the Trade Examination .
QUESTION 4
,Under R4-9-106(D), how long must a qualifying party wait to retake an examination
after the first failure?
A) 15 calendar days
B) 30 calendar days
C) 60 calendar days
D) 90 calendar days
Answer: B) 30 calendar days
Rationale: R4-9-106(D)(1) requires a 30-calendar-day waiting period after the first
examination failure. The same 30-day period applies after a second failure, with a 90-day
wait required for any subsequent failures .
QUESTION 5
Under R4-9-106(B), how frequently must the Registrar of Contractors administer the SRE
and Trade Examinations?
A) At least once a month
B) At least once every two weeks
C) At least once a week
D) On demand only
Answer: C) At least once a week
Rationale: R4-9-106(B) mandates that the Registrar, or a contracted testing service, must
administer examinations at least once a week .
, QUESTION 6
According to R4-9-106(A)(2), the Trade Examination addresses the qualifying party's
knowledge of all the following EXCEPT:
A) Construction plans and specifications applicable to the industry
B) Standards of construction work and techniques in the industry
C) Administrative principles of the contracting business
D) General understanding of other related construction trades
Answer: C) Administrative principles of the contracting business
Rationale: R4-9-106(A)(2) lists qualification in the kind of work, knowledge of
plans/specifications, standards of construction work, and general understanding of related
trades. Administrative principles are covered in the SRE, not the Trade Examination .
QUESTION 7
According to R4-9-106(E)(1), the Registrar may waive the trade examination requirement
for a qualifying party from another state if they have been licensed in a comparable
classification within the preceding:
A) 1 year
B) 3 years
C) 5 years
D) 10 years
Answer: C) 5 years
Rationale: R4-9-106(E)(1)(b) allows waiver if records show the qualifying party is currently
or has previously been a qualifying party for a licensee in another state in the same or
comparable classification within the preceding five years .
