CWB Level 1 Codes, Standards and Specifications
In Canada, who performs shop inspections of D) An inspector employed by the regulatory body in the province of
pressure vessels? (Multiple choice) fabrication.
Question options:A) An inspector certified to CSA
W178.2.B) An inspector qualified by CSWIP in the
jurisdiction of employment.C) An AWS certified QCI
inspector in jurisdiction of employment.D) An
inspector employed by the regulatory body in the
province of fabrication.
What is the first step in the preparation of a WPS? C) Select the variables to be used for welding.
(Multiple choice)
Question options:A) Qualify the welding personnel for
use on the procedure.B) Calibrate the welding
equipment used for establishing the WPS.C) Select
the variables to be used for welding.D) Inform the
jurisdictional authority of your intensions.
According to CSA B51, which code is designated for C) ASME BPVC-IX.
welding? (Multiple choice)
Question options:A) CSA Z662, Oil and Gas Pipeline
Systems.B) AWS B2.1, Specification for Welding
Procedure and Performance Qualification.C) ASME
BPVC-IX.D) American Petroleum Institute (API) 650.
,CWB Level 1 Codes, Standards and Specifications
Which code of construction does CSA B52 work in C) ASME B31.5
conjunction with? (Multiple choice)
Question options:A) ASME B31.1B) ASME B31.3C)
ASME B31.5D) ASME B31.9
Where does ASME B31.1 Boiler External Piping B) The face of the first flange.
terminate in relation to the boiler? (Multiple choice)
Question options:A) The first circumferential joint.B)
The face of the first flange.C) The first threaded
joint.D) All of the above.
The standard that covers the general requirements for D) CSA G40.20/G40.21
hollow sections, sheet, cold formed channels and
other structural quality steel in Canada is: (Multiple
choice)
Question options:A) ASTM A500B) CCIIWC) CSA
W117.1D) CSA G40.20/G40.21
, CWB Level 1 Codes, Standards and Specifications
Which code stipulates the requirement of an B) CSA W47.2
operational control procedure? (Multiple choice)
Question options:A) CSA W47.1B) CSA W47.2C) CSA
W59D) CSA W59.2
Which company division requires a full-time engineer A) Division 1.
on staff? (Multiple choice)
Question options:A) Division 1.B) Division 2.C) Division
3.D) All divisions.
The AWS D1.1 Structural Welding Code - Steel: B) includes welding procedure and performance qualification requirements.
(Multiple choice)
Question options:A) is identical in coverage to the
CSA W47.1 standard.B) includes welding procedure
and performance qualification requirements.C) has a
separate section for re-bar.D) has additional
provisions for the welding of aluminum.
It is important to note that methods and technical TRUE
requirements may differ significantly in standards from
different origins. (True/False)
In Canada, who performs shop inspections of D) An inspector employed by the regulatory body in the province of
pressure vessels? (Multiple choice) fabrication.
Question options:A) An inspector certified to CSA
W178.2.B) An inspector qualified by CSWIP in the
jurisdiction of employment.C) An AWS certified QCI
inspector in jurisdiction of employment.D) An
inspector employed by the regulatory body in the
province of fabrication.
What is the first step in the preparation of a WPS? C) Select the variables to be used for welding.
(Multiple choice)
Question options:A) Qualify the welding personnel for
use on the procedure.B) Calibrate the welding
equipment used for establishing the WPS.C) Select
the variables to be used for welding.D) Inform the
jurisdictional authority of your intensions.
According to CSA B51, which code is designated for C) ASME BPVC-IX.
welding? (Multiple choice)
Question options:A) CSA Z662, Oil and Gas Pipeline
Systems.B) AWS B2.1, Specification for Welding
Procedure and Performance Qualification.C) ASME
BPVC-IX.D) American Petroleum Institute (API) 650.
,CWB Level 1 Codes, Standards and Specifications
Which code of construction does CSA B52 work in C) ASME B31.5
conjunction with? (Multiple choice)
Question options:A) ASME B31.1B) ASME B31.3C)
ASME B31.5D) ASME B31.9
Where does ASME B31.1 Boiler External Piping B) The face of the first flange.
terminate in relation to the boiler? (Multiple choice)
Question options:A) The first circumferential joint.B)
The face of the first flange.C) The first threaded
joint.D) All of the above.
The standard that covers the general requirements for D) CSA G40.20/G40.21
hollow sections, sheet, cold formed channels and
other structural quality steel in Canada is: (Multiple
choice)
Question options:A) ASTM A500B) CCIIWC) CSA
W117.1D) CSA G40.20/G40.21
, CWB Level 1 Codes, Standards and Specifications
Which code stipulates the requirement of an B) CSA W47.2
operational control procedure? (Multiple choice)
Question options:A) CSA W47.1B) CSA W47.2C) CSA
W59D) CSA W59.2
Which company division requires a full-time engineer A) Division 1.
on staff? (Multiple choice)
Question options:A) Division 1.B) Division 2.C) Division
3.D) All divisions.
The AWS D1.1 Structural Welding Code - Steel: B) includes welding procedure and performance qualification requirements.
(Multiple choice)
Question options:A) is identical in coverage to the
CSA W47.1 standard.B) includes welding procedure
and performance qualification requirements.C) has a
separate section for re-bar.D) has additional
provisions for the welding of aluminum.
It is important to note that methods and technical TRUE
requirements may differ significantly in standards from
different origins. (True/False)
