1|Page
SolidWorks CSWA-AM EXAM || MOST RECENT EXAM
2026| 2027 ACTUAL COMPLETE REAL VERIFIED
EXAM QUESTIONS AND CORRECTLY WELL-DEFINED
ANSWERS (VEERIFIED ANSWERS) ALREADY
GRADED A+ ||NEWEST EXAM!!!
What are the different ways you can send a file to a
printer? - Answer-over wifi network and using a USB
thumbdrive
What are some ways to move a file from the computer to
the machine? - Answer-all of these, USB printer cable,
USB thumbfrive, over wifi
Scaling down a mating part will achieve what? - Answer-
Make it easier to make that part to another because of the
slightly smaller scale
If a part is too big for a machine what is the best option to
be able to print it? - Answer-cut the model into smaller
parts and print them, then glue them together once they
are all complete
,2|Page
As a general rule, when the overhang of a part's geometry
exceeds a certain angle, the use of what type of feature
should used to achieve a good print? - Answer-support
True or false. Adding more triangles to an STL file will
make the final part finish better. - Answer-true
While CAD programs such as SOLIDWORKS allow to
print directly form inside the CAD software, the export of
the files is still sometimes necessary. What is the most
common file type for exporting a part to a 3D Printing
slicer program? - Answer-.STL
The creation of advanced part structures is aided by what
type of CAD design tool? - Answer-Generative design
A common feature of 3D printing slicer programs is one
that helps a part stick build plate. What is this feature
called? - Answer-raft
true or false. Raft must be modeled in the CAD model
before sending the file to the slicer program. - Answer-
false
, 3|Page
true or false. Supports for overhang areas must be
modeled into the CAD model before sending it to the slicer
software. - Answer-false
true or false. Clearance must be modeled in at the CAD
level in order for parts to fit together after they are printed.
- Answer-false, you can scale the part in the slicer
software in order to maintain design intent at the CAD
level
true and false. 3DContentCentral provides both native
SOILDWORKS files as well as STL files meaning you can
move downloaded file to the printer without the need to
convert it in a CAD program. - Answer-true
Sites such as Thingiverse.com or 3DContentCentral.com
are useful for 3D Printing in what way? - Answer-They
host free CAD files that can be 3D printed
In partnership with 3D System features an add-in that
among many features allows you to print an assembly file
in one piece. What is this tool called? - Answer-3DXpert
SolidWorks CSWA-AM EXAM || MOST RECENT EXAM
2026| 2027 ACTUAL COMPLETE REAL VERIFIED
EXAM QUESTIONS AND CORRECTLY WELL-DEFINED
ANSWERS (VEERIFIED ANSWERS) ALREADY
GRADED A+ ||NEWEST EXAM!!!
What are the different ways you can send a file to a
printer? - Answer-over wifi network and using a USB
thumbdrive
What are some ways to move a file from the computer to
the machine? - Answer-all of these, USB printer cable,
USB thumbfrive, over wifi
Scaling down a mating part will achieve what? - Answer-
Make it easier to make that part to another because of the
slightly smaller scale
If a part is too big for a machine what is the best option to
be able to print it? - Answer-cut the model into smaller
parts and print them, then glue them together once they
are all complete
,2|Page
As a general rule, when the overhang of a part's geometry
exceeds a certain angle, the use of what type of feature
should used to achieve a good print? - Answer-support
True or false. Adding more triangles to an STL file will
make the final part finish better. - Answer-true
While CAD programs such as SOLIDWORKS allow to
print directly form inside the CAD software, the export of
the files is still sometimes necessary. What is the most
common file type for exporting a part to a 3D Printing
slicer program? - Answer-.STL
The creation of advanced part structures is aided by what
type of CAD design tool? - Answer-Generative design
A common feature of 3D printing slicer programs is one
that helps a part stick build plate. What is this feature
called? - Answer-raft
true or false. Raft must be modeled in the CAD model
before sending the file to the slicer program. - Answer-
false
, 3|Page
true or false. Supports for overhang areas must be
modeled into the CAD model before sending it to the slicer
software. - Answer-false
true or false. Clearance must be modeled in at the CAD
level in order for parts to fit together after they are printed.
- Answer-false, you can scale the part in the slicer
software in order to maintain design intent at the CAD
level
true and false. 3DContentCentral provides both native
SOILDWORKS files as well as STL files meaning you can
move downloaded file to the printer without the need to
convert it in a CAD program. - Answer-true
Sites such as Thingiverse.com or 3DContentCentral.com
are useful for 3D Printing in what way? - Answer-They
host free CAD files that can be 3D printed
In partnership with 3D System features an add-in that
among many features allows you to print an assembly file
in one piece. What is this tool called? - Answer-3DXpert
