___ keys are used for transmitting heavy torques in shafts and hubs that are reversed
frequently and subject to vibration.
A. Alternating
B. Parallel
C. Taper
D. Woodruff
Give this one a try later!
C. Taper
_________expansion is the change in volume of a material in relation to temperature
expansion is the change in volume of a material in relation to temperature.
Give this one a try later!
, thermal
_____is a joining process that joins parts by heating a filler metal to temperatures greater
than 840°F but less than the melting point of the base metal
Give this one a try later!
brazing
On the Celsius scale, ___°C is the freezing point.
A. 0
B. 32
C. 100
D. 212
Give this one a try later!
A. 0
Hand tools used for fastening include ___.
A. wrenches
B. grinders
C. air chisels
D. drill presses
Give this one a try later!
, A. wrenches
High-___ materials resist stress from loads, deform easily, and fracture gradually.
A. ductile
B. brittle
C. oxidation
D. magnetic
Give this one a try later!
A. ductile
A(n) ___ adhesive is a one- or two-part adhesive or sealant that cures by evaporation
or catalyst.
A. polysulfide
B. cyanoacrylate
C. polyurethane
D. anaerobic
Give this one a try later!
A. polysulfide
________is the measure of the resistance of a fluid to flow.
Give this one a try later!
frequently and subject to vibration.
A. Alternating
B. Parallel
C. Taper
D. Woodruff
Give this one a try later!
C. Taper
_________expansion is the change in volume of a material in relation to temperature
expansion is the change in volume of a material in relation to temperature.
Give this one a try later!
, thermal
_____is a joining process that joins parts by heating a filler metal to temperatures greater
than 840°F but less than the melting point of the base metal
Give this one a try later!
brazing
On the Celsius scale, ___°C is the freezing point.
A. 0
B. 32
C. 100
D. 212
Give this one a try later!
A. 0
Hand tools used for fastening include ___.
A. wrenches
B. grinders
C. air chisels
D. drill presses
Give this one a try later!
, A. wrenches
High-___ materials resist stress from loads, deform easily, and fracture gradually.
A. ductile
B. brittle
C. oxidation
D. magnetic
Give this one a try later!
A. ductile
A(n) ___ adhesive is a one- or two-part adhesive or sealant that cures by evaporation
or catalyst.
A. polysulfide
B. cyanoacrylate
C. polyurethane
D. anaerobic
Give this one a try later!
A. polysulfide
________is the measure of the resistance of a fluid to flow.
Give this one a try later!
