NCCCO telescopic boom crane - fixed cab (TSS) Exam
(Latest 2026) || Most Recent Exam 2026|2027 Actual
Complete Real Verified Exam Questions And Correct
Answers (Verified Answers) Already Graded A+ |
Guaranteed Success!! Newest Exam!!
The safest maximum speed for a telescopic boom crane
performing pick-and-carry operations is - Answer-The
manufacturer's recommended speed limit
When using blocking under the outrigger floats/pads, the
operator should make sure the blocking is - Answer-
Sufficient to support/stabilize the crane
When a boom extension is in the stowed position, it is -
Answer-Pinned to the boom base section
When a telescopic boom crane is engaged in a pick-and-
carry operation, the rated tipping capacity is based on
what percentage of the total tipping capacity? - Answer-
75%
,2|Page
According to OSHA 1926 sub-part cc, all telescopic boom
cranes must be equipped with - Answer-A boom angle
indicator
Jib capacities are based on: - Answer-structural strength
When lifting over a corner, ground pressure generated by
the crane can approach a weight that is - Answer-equal to
the weight of the crane and suspended load
What is the purpose of the boom length indicator? -
Answer-Indicates the extended length of the boom
When making lifts on outriggers, the maximum ground-
bearing pressure occurs when the load is over - Answer-A
corner
An erected telescopic boom extension becomes a
capacity reduction when it is - Answer-Not used to make
the lift
The term luffing jib refers to an attachment that - Answer-
Can change radius independent of the main boom
, 3|Page
What item is not permissible to be removed from a
carrydeck crane? - Answer-Boom extension
While performing a pick-and-carry operation with a
telescopic boom crane, what precaution should be taken?
- Answer-Have the boom in line with the direction of travel
When hook-suspended personnel platforms are lifted with
a telescopic boom crane, - Answer-An anti two-block
devise must be provided
When using a telescopic boom crane equipped with an
anti two-block device, which hydraulic functions are
disabled when the device is activated? - Answer-Hoist,
extend the boom, boom down
When are outrigger floats/pads required to be fastened to
the outrigger? - Answer-When the crane is set up for a lift
When operating a telescopic boom crane, two-blocking
can be caused by - Answer-Extending the boom without
lowering the load block