JLTV COURSE TEST A LATEST
QUESTIONS AND
ANSWERS 2026 - 2027
When traversing through sand, snow, or mud, which of the
following driving techniques is recommended?
Keep a steady throttle and momentum.
Why must your setting be configured properly BEFORE driving on
soft soils? (BLANK)
Without proper configuration the JLTV's chance of becoming stuck or
mired increases.
What is the key difference between driving on flat terrain and
slopes?
TRACTION
The independent suspension of the JLTV uses __________ and
hydraulic damping to keep the tires in contact with the ground over
varying terrain.
high pressure gas shocks
As a JLTV driver, what must you do before beginning to ascend a
steep slope? Select all that apply.
A. Assess the terrain and available traction
B. Choose the safest route
D. Choose proper gearing
What mode should CTIS be in for ascending a 60% grade?
END OF
PAGE
1
, JLTV COURSE TEST A LATEST
QUESTIONS AND
ANSWERS 2026 - 2027
CC
You are preparing to climb a 60% grade and traction is limited.
You choose to set the transaxle to low range. What steps must you
follow to put the transaxle in low range? Select all that apply.
B. Put transmission in neutral.
C. Stop the vehicle.
D. Allow vehicle to move slightly forward or backward to complete the
range change.
When first leaving a paved, or improved, surface to go off-road,
what CTIS setting should you select?
CC
Before negotiating any obstacle, what settings need to be
configured? Select all that apply.
A. CTIS
B. Transaxle
C. Suspension
What approach angle increases the chance of a rollover?
45°
What should you do if you lose momentum when driving over
obstacles?
END OF
PAGE
2
QUESTIONS AND
ANSWERS 2026 - 2027
When traversing through sand, snow, or mud, which of the
following driving techniques is recommended?
Keep a steady throttle and momentum.
Why must your setting be configured properly BEFORE driving on
soft soils? (BLANK)
Without proper configuration the JLTV's chance of becoming stuck or
mired increases.
What is the key difference between driving on flat terrain and
slopes?
TRACTION
The independent suspension of the JLTV uses __________ and
hydraulic damping to keep the tires in contact with the ground over
varying terrain.
high pressure gas shocks
As a JLTV driver, what must you do before beginning to ascend a
steep slope? Select all that apply.
A. Assess the terrain and available traction
B. Choose the safest route
D. Choose proper gearing
What mode should CTIS be in for ascending a 60% grade?
END OF
PAGE
1
, JLTV COURSE TEST A LATEST
QUESTIONS AND
ANSWERS 2026 - 2027
CC
You are preparing to climb a 60% grade and traction is limited.
You choose to set the transaxle to low range. What steps must you
follow to put the transaxle in low range? Select all that apply.
B. Put transmission in neutral.
C. Stop the vehicle.
D. Allow vehicle to move slightly forward or backward to complete the
range change.
When first leaving a paved, or improved, surface to go off-road,
what CTIS setting should you select?
CC
Before negotiating any obstacle, what settings need to be
configured? Select all that apply.
A. CTIS
B. Transaxle
C. Suspension
What approach angle increases the chance of a rollover?
45°
What should you do if you lose momentum when driving over
obstacles?
END OF
PAGE
2
