Asbestos Practice Exam 2 (New 2026/ 2027
Update) Questions & Answers {Grade A}
100% Correct (Verified Solutions)
What is the primary shortcoming of sampling suspect acm? - Correct answer the
unnecessary release of fibers
Which is one of the 3 groups that the epa uses to categorize acm? - Correct answer
insulation on boilers, pipes, ducts, tanks, and other equipment
The two types of encapsulants are - Correct answer penetrating and briding
The fee for the asbestos cert for work over 100 sf is - Correct answer $50
What is the major consequence of water damage to acm? - Correct answer asbestos
fibers are left exposed to further erosion.
What must the contractor submit if the abatement projects involve 260 lf of pipe
insulation or 160 sf of sprayed, troweled or otherwise applied material or covering or
,components become necessary? - Correct answer written notification in accordance
with 40 cfr 61.146 sub part M
To qualify as asbestos containing material ____ of asbestos is required in the analysis -
Correct answer .1%
The most vital feature on a negative air pressure unit or cabinet is - Correct answer
instrument that measures efficiency
Asbestos related cancer usually arrives - Correct answer 20 years following the
exposure
The number of sources of power recommended are - Correct answer a min of 2
The common width of negative air pressure units or cabinets is - Correct answer 30"
or less
, The second efficency test of a negative air pressure unit is - Correct answer
ventilation smoke tubes and a rubber bulb to check air flow direction
A negative air pressure is - Correct answer where air is filtered out faster than
filtered in
If the air sampling and visual inspection proves a positive result, what happens? -
Correct answer the contractor is released
What should be taken off by a worker in the shower room? - Correct answer the
protective hat, the protective gloves, the respirator
How should loaded debris bags be handled? - Correct answer they should be wet
wiped and put in another plastic bag
The number of core samples of material that should be taken from each homogenous
area is - Correct answer a min of 3
Update) Questions & Answers {Grade A}
100% Correct (Verified Solutions)
What is the primary shortcoming of sampling suspect acm? - Correct answer the
unnecessary release of fibers
Which is one of the 3 groups that the epa uses to categorize acm? - Correct answer
insulation on boilers, pipes, ducts, tanks, and other equipment
The two types of encapsulants are - Correct answer penetrating and briding
The fee for the asbestos cert for work over 100 sf is - Correct answer $50
What is the major consequence of water damage to acm? - Correct answer asbestos
fibers are left exposed to further erosion.
What must the contractor submit if the abatement projects involve 260 lf of pipe
insulation or 160 sf of sprayed, troweled or otherwise applied material or covering or
,components become necessary? - Correct answer written notification in accordance
with 40 cfr 61.146 sub part M
To qualify as asbestos containing material ____ of asbestos is required in the analysis -
Correct answer .1%
The most vital feature on a negative air pressure unit or cabinet is - Correct answer
instrument that measures efficiency
Asbestos related cancer usually arrives - Correct answer 20 years following the
exposure
The number of sources of power recommended are - Correct answer a min of 2
The common width of negative air pressure units or cabinets is - Correct answer 30"
or less
, The second efficency test of a negative air pressure unit is - Correct answer
ventilation smoke tubes and a rubber bulb to check air flow direction
A negative air pressure is - Correct answer where air is filtered out faster than
filtered in
If the air sampling and visual inspection proves a positive result, what happens? -
Correct answer the contractor is released
What should be taken off by a worker in the shower room? - Correct answer the
protective hat, the protective gloves, the respirator
How should loaded debris bags be handled? - Correct answer they should be wet
wiped and put in another plastic bag
The number of core samples of material that should be taken from each homogenous
area is - Correct answer a min of 3
