S-95 FDNY TEST (New 2026/ 2027 Update)
Questions & Answers {Grade A} 100%
Correct (Verified Solutions)
Alarm Silence Switch or Button - Correct answer Is used to silence the building
audible and visual
Devices after evacuation is complete while the source of alarm is being investigated.
Never reset the fire alarm system until the condition is verified by the FDNY personnel.
System Reset Switch Or Button - Correct answer Reset fire alarm system after
condition is cleared. Should return to normal condition after resetting. Often required
to clear supervisory conditions, does not clear trouble conditions.
Smoke detectors must be - Correct answer Cleaned once every 6 months. Test for
smoke entry every once a year
Primary Power - Correct answer shall be generated electric power not exceeding
277/480 volts
, Secondary Power Source - Correct answer Batteries shall not be a sub for connection
to the secondary source
Manual Pull Station~Manually pulling handle - Correct answer Return handle to
normal position. A key or other method may be required to reset the station to normal
Smoke, beam, and duct detectors~ Detection of particles of combustion - Correct
answer Smoke detectors will normally reset when the reset button is pressed at the
FACP if the condition activating the detector has been cleared
Heat detectors~ Abnormally high temperature - Correct answer After activation most
Fixed temperature heat detectors will not self restore and will require replacement by
a qualified service technician. Rate of rise detectors will normally self- restore after
activation.
Water-Flow device~ Flow of water in a sprinkler system - Correct answer Device
should return to normal when water ceases to flow.
Questions & Answers {Grade A} 100%
Correct (Verified Solutions)
Alarm Silence Switch or Button - Correct answer Is used to silence the building
audible and visual
Devices after evacuation is complete while the source of alarm is being investigated.
Never reset the fire alarm system until the condition is verified by the FDNY personnel.
System Reset Switch Or Button - Correct answer Reset fire alarm system after
condition is cleared. Should return to normal condition after resetting. Often required
to clear supervisory conditions, does not clear trouble conditions.
Smoke detectors must be - Correct answer Cleaned once every 6 months. Test for
smoke entry every once a year
Primary Power - Correct answer shall be generated electric power not exceeding
277/480 volts
, Secondary Power Source - Correct answer Batteries shall not be a sub for connection
to the secondary source
Manual Pull Station~Manually pulling handle - Correct answer Return handle to
normal position. A key or other method may be required to reset the station to normal
Smoke, beam, and duct detectors~ Detection of particles of combustion - Correct
answer Smoke detectors will normally reset when the reset button is pressed at the
FACP if the condition activating the detector has been cleared
Heat detectors~ Abnormally high temperature - Correct answer After activation most
Fixed temperature heat detectors will not self restore and will require replacement by
a qualified service technician. Rate of rise detectors will normally self- restore after
activation.
Water-Flow device~ Flow of water in a sprinkler system - Correct answer Device
should return to normal when water ceases to flow.
