U-Haul EHS 138aCT Forklift Operations & U-Box Safety
Certification Actual Exam 2026/2027 – Complete Exam-Style
Questions with Detailed Rationales | 100% Verified | Pass
Guaranteed – A+ Graded
Section A: Forklift Operations – Safe Operation & Daily Inspections (12
Questions)
Q1: A U-Haul Team Member is conducting the pre-operation inspection before starting
the shift. According to OSHA 29 CFR 1910.178 and U-Haul EHS policy, which of the
following items must be checked?
A. Only the fuel level and tire pressure
B. Only the horn, lights, and seat belt
C. Fluid levels, tires, forks, mast, chains, lights, horn, brakes, steering, backup alarm, and
overhead guard [CORRECT]
D. Only the mirrors and operator compartment cleanliness
Correct Answer: C
Rationale: OSHA 1910.178(q)(7) and U-Haul EHS policy require a comprehensive daily
pre-operation inspection covering all critical safety components including fluids, tires,
forks, mast, chains, lights, horn, brakes, steering, backup alarm, and overhead guard.
Options A, B, and D are incomplete and would allow unsafe equipment to be placed into
service.
,Q2: During the daily pre-operation inspection, a Team Member discovers that the
forklift's backup alarm is not functioning. What is the correct action?
A. Operate the forklift carefully without the alarm since it is only a warning device
B. Tag the forklift as out of service and report the defect to a supervisor before
operating [CORRECT]
C. Continue operating but use the horn more frequently
D. Repair the alarm personally if it seems like a simple fix
Correct Answer: B
Rationale: Defective safety devices must be reported immediately and the equipment
removed from service until repaired per OSHA 1910.178(q)(8). Operating without a
functioning backup alarm (A, C) endangers pedestrians; unauthorized repairs (D) violate
maintenance protocols.
Q3: When mounting a forklift, a Team Member should use the three-point contact
technique. This means:
A. Both feet and one hand, or both hands and one foot, in contact with the forklift at all
times [CORRECT]
B. Both hands on the steering wheel and both feet on the floorboard simultaneously
C. One hand on the seat, one on the overhead guard, and one foot on the ground
D. Both feet on the steps and the body leaning against the overhead guard
Correct Answer: A
, Rationale: Three-point contact requires three of four limbs in contact with the forklift
during mounting and dismounting to prevent falls. Option B describes four-point contact
which is impractical during entry; C and D describe unstable positions that increase fall
risk.
Q4: A forklift at a U-Haul facility is equipped with a seat belt. Under OSHA and U-Haul
EHS policy, when must the operator wear the seat belt?
A. Only when traveling on ramps or inclines
B. Only when lifting loads above 50% of rated capacity
C. At all times while the forklift is in operation [CORRECT]
D. Only when operating in areas with pedestrian traffic
Correct Answer: C
Rationale: OSHA 1910.178(n)(4) requires operators to use seat belts when provided.
The seat belt prevents the operator from being thrown from the protective frame during
tip-overs, which can occur at any time, not just on ramps or with heavy loads.
Q5: What is the correct starting procedure for a propane-powered forklift?
A. Start the engine while standing beside the forklift to listen for leaks
B. Ensure the operator is seated, the parking brake is engaged, the direction control is in
neutral, and the area is clear before starting [CORRECT]
C. Start the engine first, then fasten the seat belt and check mirrors
D. Start the engine with the mast fully raised to allow ventilation
Certification Actual Exam 2026/2027 – Complete Exam-Style
Questions with Detailed Rationales | 100% Verified | Pass
Guaranteed – A+ Graded
Section A: Forklift Operations – Safe Operation & Daily Inspections (12
Questions)
Q1: A U-Haul Team Member is conducting the pre-operation inspection before starting
the shift. According to OSHA 29 CFR 1910.178 and U-Haul EHS policy, which of the
following items must be checked?
A. Only the fuel level and tire pressure
B. Only the horn, lights, and seat belt
C. Fluid levels, tires, forks, mast, chains, lights, horn, brakes, steering, backup alarm, and
overhead guard [CORRECT]
D. Only the mirrors and operator compartment cleanliness
Correct Answer: C
Rationale: OSHA 1910.178(q)(7) and U-Haul EHS policy require a comprehensive daily
pre-operation inspection covering all critical safety components including fluids, tires,
forks, mast, chains, lights, horn, brakes, steering, backup alarm, and overhead guard.
Options A, B, and D are incomplete and would allow unsafe equipment to be placed into
service.
,Q2: During the daily pre-operation inspection, a Team Member discovers that the
forklift's backup alarm is not functioning. What is the correct action?
A. Operate the forklift carefully without the alarm since it is only a warning device
B. Tag the forklift as out of service and report the defect to a supervisor before
operating [CORRECT]
C. Continue operating but use the horn more frequently
D. Repair the alarm personally if it seems like a simple fix
Correct Answer: B
Rationale: Defective safety devices must be reported immediately and the equipment
removed from service until repaired per OSHA 1910.178(q)(8). Operating without a
functioning backup alarm (A, C) endangers pedestrians; unauthorized repairs (D) violate
maintenance protocols.
Q3: When mounting a forklift, a Team Member should use the three-point contact
technique. This means:
A. Both feet and one hand, or both hands and one foot, in contact with the forklift at all
times [CORRECT]
B. Both hands on the steering wheel and both feet on the floorboard simultaneously
C. One hand on the seat, one on the overhead guard, and one foot on the ground
D. Both feet on the steps and the body leaning against the overhead guard
Correct Answer: A
, Rationale: Three-point contact requires three of four limbs in contact with the forklift
during mounting and dismounting to prevent falls. Option B describes four-point contact
which is impractical during entry; C and D describe unstable positions that increase fall
risk.
Q4: A forklift at a U-Haul facility is equipped with a seat belt. Under OSHA and U-Haul
EHS policy, when must the operator wear the seat belt?
A. Only when traveling on ramps or inclines
B. Only when lifting loads above 50% of rated capacity
C. At all times while the forklift is in operation [CORRECT]
D. Only when operating in areas with pedestrian traffic
Correct Answer: C
Rationale: OSHA 1910.178(n)(4) requires operators to use seat belts when provided.
The seat belt prevents the operator from being thrown from the protective frame during
tip-overs, which can occur at any time, not just on ramps or with heavy loads.
Q5: What is the correct starting procedure for a propane-powered forklift?
A. Start the engine while standing beside the forklift to listen for leaks
B. Ensure the operator is seated, the parking brake is engaged, the direction control is in
neutral, and the area is clear before starting [CORRECT]
C. Start the engine first, then fasten the seat belt and check mirrors
D. Start the engine with the mast fully raised to allow ventilation
