Indiana (IN) Sign Contractor (Non-
Electric) Practice Exam Questions &
Correct Answers Verified Plus Rationales
2026 | Instant Download Pdf
1. Which Indiana license classification is required for a contractor whose work
involves installing illuminated electrical signs?
A) Class B
B) Class C
C) Class D
D) Class A
Correct Answer: D
Explanation: Class A licenses are specifically for contractors performing electric sign
work, including illuminated signs. Class B licenses are for non-electric signs, while
Classes C and D cover other specialties or are not standard classifications for this work .
2. A Class B (Non-Electric) sign contractor in Indiana is required by statute to
maintain a minimum general liability insurance coverage of:
A) $100,000
B) $250,000
C) $1,000,000
D) $500,000
Correct Answer: D
Explanation: Indiana statutes mandate a minimum of $500,000 in general liability
insurance for sign contractors, ensuring adequate protection against potential claims .
3. What is the typical surety bond amount required for a non-electric sign
contractor in Indiana?
,A) $1,000 – $2,000
B) $3,000 – $4,000
C) $5,000 – $10,000
D) $15,000 – $20,000
Correct Answer: C
Explanation: The typical surety bond required for non-electric sign contractors in
Indiana falls within the $5,000 to $10,000 range, serving as a financial guarantee for
compliance with regulations and contractual obligations .
4. According to Allen County regulations, what is the maximum square footage for
a non-electric exterior sign that a Category "B" Sign Contractor can install?
A) 64 square feet
B) 100 square feet
C) 128 square feet
D) 256 square feet
Correct Answer: C
Explanation: Allen County rules specify that Category "B" licenses are for the erection or
maintenance of non-electric, exterior signs of not more than 128 square feet and must
not overhang public property .
5. How many years of experience are required to apply for a Category "B" Sign
Contractors License in Allen County, Indiana?
A) 1 year
B) 2 years
C) 4 years
D) 3 years
Correct Answer: D
Explanation: Applicants for a Category "B" Sign Contractors License must have three (3)
years and 5,250 hours of experience in the construction and installation of signs with a
Category "B" licensee .
,6. A Category "A" Sign Contractors License in Allen County requires how many
years and hours of work experience?
A) 2 years and 4,000 hours
B) 3 years and 5,250 hours
C) 4 years and 7,000 hours
D) 5 years and 8,000 hours
Correct Answer: C
Explanation: The regulations for Allen County require an applicant for a Category "A"
license to have worked for four (4) years and 7,000 hours in the construction and
installation of signs with a Category "A" Sign Contractor .
7. What does a "Site Plan" on a blueprint typically show?
A) The internal components of a sign cabinet
B) The front face of the sign with graphics
C) The overall layout and context of the installation location
D) The structural details of the mounting foundation
Correct Answer: C
Explanation: A site plan provides a top-down view illustrating the layout and context of
the installation location, including boundaries, adjacent structures, and other relevant
site features .
8. What is the primary purpose of a "Title Block" on a blueprint?
A) To show the color scheme of the sign
B) To list all materials needed for fabrication
C) To provide the project title, scale, date, and drawing number
D) To explain the symbols and abbreviations used
Correct Answer: C
Explanation: The title block is a crucial part of a blueprint that provides essential project
information such as the scale, date, project title, and drawing identification numbers .
9. What does a "Section View" (e.g., Section A-A) on a blueprint indicate?
A) A view looking directly at the sign face
, B) The location of the sign on the site
C) A detailed cross-sectional view showing internal components
D) The electrical wiring layout
Correct Answer: C
Explanation: A section view shows a cross-sectional slice through the sign, revealing
internal construction details not visible from the exterior, such as framing and internal
supports .
10. What does the abbreviation "NTS" typically mean on a blueprint detail?
A) New Technical Standard
B) Next to Specification
C) Not to Scale
D) Not Tested Sample
Correct Answer: C
Explanation: "NTS" stands for "Not to Scale." This indicates that the drawing element is
not drawn proportionally and should not be measured for dimensions .
11. What is the primary function of a "Legend" on a blueprint?
A) To provide a historical overview of the project
B) To list the contractor's contact information
C) To explain the symbols, abbreviations, and notations used on the drawing
D) To show the estimated project cost breakdown
Correct Answer: C
Explanation: A legend serves as a key to understanding the various symbols and
abbreviations used on the blueprint, ensuring all users interpret the drawing correctly .
12. In blueprint reading, what do "detail views" refer to?
A) The overall perspective of the sign from a distance
B) Enlarged, specific sections of a drawing for clarity and intricate construction details
C) The electrical connections for the sign's lighting
D) The relationship between the sign and its surrounding landscape
Correct Answer: B
Electric) Practice Exam Questions &
Correct Answers Verified Plus Rationales
2026 | Instant Download Pdf
1. Which Indiana license classification is required for a contractor whose work
involves installing illuminated electrical signs?
A) Class B
B) Class C
C) Class D
D) Class A
Correct Answer: D
Explanation: Class A licenses are specifically for contractors performing electric sign
work, including illuminated signs. Class B licenses are for non-electric signs, while
Classes C and D cover other specialties or are not standard classifications for this work .
2. A Class B (Non-Electric) sign contractor in Indiana is required by statute to
maintain a minimum general liability insurance coverage of:
A) $100,000
B) $250,000
C) $1,000,000
D) $500,000
Correct Answer: D
Explanation: Indiana statutes mandate a minimum of $500,000 in general liability
insurance for sign contractors, ensuring adequate protection against potential claims .
3. What is the typical surety bond amount required for a non-electric sign
contractor in Indiana?
,A) $1,000 – $2,000
B) $3,000 – $4,000
C) $5,000 – $10,000
D) $15,000 – $20,000
Correct Answer: C
Explanation: The typical surety bond required for non-electric sign contractors in
Indiana falls within the $5,000 to $10,000 range, serving as a financial guarantee for
compliance with regulations and contractual obligations .
4. According to Allen County regulations, what is the maximum square footage for
a non-electric exterior sign that a Category "B" Sign Contractor can install?
A) 64 square feet
B) 100 square feet
C) 128 square feet
D) 256 square feet
Correct Answer: C
Explanation: Allen County rules specify that Category "B" licenses are for the erection or
maintenance of non-electric, exterior signs of not more than 128 square feet and must
not overhang public property .
5. How many years of experience are required to apply for a Category "B" Sign
Contractors License in Allen County, Indiana?
A) 1 year
B) 2 years
C) 4 years
D) 3 years
Correct Answer: D
Explanation: Applicants for a Category "B" Sign Contractors License must have three (3)
years and 5,250 hours of experience in the construction and installation of signs with a
Category "B" licensee .
,6. A Category "A" Sign Contractors License in Allen County requires how many
years and hours of work experience?
A) 2 years and 4,000 hours
B) 3 years and 5,250 hours
C) 4 years and 7,000 hours
D) 5 years and 8,000 hours
Correct Answer: C
Explanation: The regulations for Allen County require an applicant for a Category "A"
license to have worked for four (4) years and 7,000 hours in the construction and
installation of signs with a Category "A" Sign Contractor .
7. What does a "Site Plan" on a blueprint typically show?
A) The internal components of a sign cabinet
B) The front face of the sign with graphics
C) The overall layout and context of the installation location
D) The structural details of the mounting foundation
Correct Answer: C
Explanation: A site plan provides a top-down view illustrating the layout and context of
the installation location, including boundaries, adjacent structures, and other relevant
site features .
8. What is the primary purpose of a "Title Block" on a blueprint?
A) To show the color scheme of the sign
B) To list all materials needed for fabrication
C) To provide the project title, scale, date, and drawing number
D) To explain the symbols and abbreviations used
Correct Answer: C
Explanation: The title block is a crucial part of a blueprint that provides essential project
information such as the scale, date, project title, and drawing identification numbers .
9. What does a "Section View" (e.g., Section A-A) on a blueprint indicate?
A) A view looking directly at the sign face
, B) The location of the sign on the site
C) A detailed cross-sectional view showing internal components
D) The electrical wiring layout
Correct Answer: C
Explanation: A section view shows a cross-sectional slice through the sign, revealing
internal construction details not visible from the exterior, such as framing and internal
supports .
10. What does the abbreviation "NTS" typically mean on a blueprint detail?
A) New Technical Standard
B) Next to Specification
C) Not to Scale
D) Not Tested Sample
Correct Answer: C
Explanation: "NTS" stands for "Not to Scale." This indicates that the drawing element is
not drawn proportionally and should not be measured for dimensions .
11. What is the primary function of a "Legend" on a blueprint?
A) To provide a historical overview of the project
B) To list the contractor's contact information
C) To explain the symbols, abbreviations, and notations used on the drawing
D) To show the estimated project cost breakdown
Correct Answer: C
Explanation: A legend serves as a key to understanding the various symbols and
abbreviations used on the blueprint, ensuring all users interpret the drawing correctly .
12. In blueprint reading, what do "detail views" refer to?
A) The overall perspective of the sign from a distance
B) Enlarged, specific sections of a drawing for clarity and intricate construction details
C) The electrical connections for the sign's lighting
D) The relationship between the sign and its surrounding landscape
Correct Answer: B
