NEIEP 800 final review ACTUAL UPDATED QUESTIONS AND CORRECT ANSWERS
The total weight of your elevator (force) is 8100 lbs. and 162 psi
its plunger area is 50 square inches. What is the system
pressure?
, Refer to the NEIEP Moving Walk Final Layout. What is the 134' 11"
correct wellway-to-wellway distance?
Electrolysis is caused by which of the following? Stray current corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must 30
be how many times the diameter of the suspension
ropes?
Wye-Delta starting is used for which of the following? Reduced current starting
You need the area of the plunger to calculate the 50.27 square inches
pressure of the hydraulic system. Your plunger is 8 inches
in diameter. What is it's area?
Which of the following provides mechanical interlocking Interlock contacts
of contactors?
As the certified welder on the job you must weld two Tack welds then a fill bead
cylinder pieces. How must you join the two pieces?
Once a plunger joint has been completed, what steps Sand with emery cloth
should be followed to prevent damage to the packing?
Under which of the following conditions will the buzzer When the handrail speed is 15% below step speed.
(BZT) sound?
Refer to the NEIEP Escalator Final Layout diagram. What is 13' 6"
the total distance from the first floor finished floor height
and the second floor finished floor height?
Refer to the NEIEP Escalator Final Layout diagram. What is 7' 6 1/2"
the correct measurement to align the truss in the center
of the wellway?
The total weight of your elevator (force) is 8100 lbs. and 162 psi
its plunger area is 50 square inches. What is the system
pressure?
, Refer to the NEIEP Moving Walk Final Layout. What is the 134' 11"
correct wellway-to-wellway distance?
Electrolysis is caused by which of the following? Stray current corrosion and Galvanic corrosion BOTH ARE CORRECT
When using wire rope, the diameter of the sheaves must 30
be how many times the diameter of the suspension
ropes?
Wye-Delta starting is used for which of the following? Reduced current starting
You need the area of the plunger to calculate the 50.27 square inches
pressure of the hydraulic system. Your plunger is 8 inches
in diameter. What is it's area?
Which of the following provides mechanical interlocking Interlock contacts
of contactors?
As the certified welder on the job you must weld two Tack welds then a fill bead
cylinder pieces. How must you join the two pieces?
Once a plunger joint has been completed, what steps Sand with emery cloth
should be followed to prevent damage to the packing?
Under which of the following conditions will the buzzer When the handrail speed is 15% below step speed.
(BZT) sound?
Refer to the NEIEP Escalator Final Layout diagram. What is 13' 6"
the total distance from the first floor finished floor height
and the second floor finished floor height?
Refer to the NEIEP Escalator Final Layout diagram. What is 7' 6 1/2"
the correct measurement to align the truss in the center
of the wellway?
