NEIEP 500 Final ACTUAL UPDATED QUESTIONS AND CORRECT ANSWERS
Ground (515 pg. 26) What does the symbol shown below represent?
, 3 (555 pg. 26) How many turns of safety rope must remain on the safety drum after a rated load
and rated speed test of a winding drum operated safety?
rail jack bolts (555 pg. 16) Proper adjustment of which of the following can reduce the effects of building
compression on an elevator installation?
Liquidtight Flexible Metal Conduit (505 pg. 6) What type of flex would be used to pipe a switch in a wet location?
door clutch (530 pg. 30) Which of the following components is used to engage and couple the car door to
the hoistway door during opening and closing?
100 feet (510 pg. 10) On high rise of raceways, the wires must be supported at least how many feet?
#14 (505 pg. 36) What is the minimum size wire allowed be code for wiring 100 VAC lighting circuits
to elevator cars?
raceway (505 pg. 1) What is the metal enclosure that furnishes protection for electrical wire called?
42 inches What is the minimum height of a barricade placed around as open hoistway?
360 degrees When bending conduit, what is the maximum number of bends in degrees
between access points?
proximity devices (535 pg. 23) Which of the following would be used to automatically reopen the doors without
physical contact of power operated vertically sliding freight elevator doors?
It must be tamper proof to prevent override of the door Which of the following is a requirement that must be met when interlocks are
contacts (535 pg. 9) installed on freight elevators?
The cam must apply a force that is double that required When setting up a retiring cam for a freight elevator, which of the following
for normal interlock operation (515 pg. 26) statements is correct?
Ground (515 pg. 26) What does the symbol shown below represent?
, 3 (555 pg. 26) How many turns of safety rope must remain on the safety drum after a rated load
and rated speed test of a winding drum operated safety?
rail jack bolts (555 pg. 16) Proper adjustment of which of the following can reduce the effects of building
compression on an elevator installation?
Liquidtight Flexible Metal Conduit (505 pg. 6) What type of flex would be used to pipe a switch in a wet location?
door clutch (530 pg. 30) Which of the following components is used to engage and couple the car door to
the hoistway door during opening and closing?
100 feet (510 pg. 10) On high rise of raceways, the wires must be supported at least how many feet?
#14 (505 pg. 36) What is the minimum size wire allowed be code for wiring 100 VAC lighting circuits
to elevator cars?
raceway (505 pg. 1) What is the metal enclosure that furnishes protection for electrical wire called?
42 inches What is the minimum height of a barricade placed around as open hoistway?
360 degrees When bending conduit, what is the maximum number of bends in degrees
between access points?
proximity devices (535 pg. 23) Which of the following would be used to automatically reopen the doors without
physical contact of power operated vertically sliding freight elevator doors?
It must be tamper proof to prevent override of the door Which of the following is a requirement that must be met when interlocks are
contacts (535 pg. 9) installed on freight elevators?
The cam must apply a force that is double that required When setting up a retiring cam for a freight elevator, which of the following
for normal interlock operation (515 pg. 26) statements is correct?
