Massachusetts 2A Hoisting License Exam Questions and Answers 2026/2027
A+ Grade | Complete 2A Hoisting License Certification Study Guide
How many pounds in a ton? - (ANSWER)2000 pounds
What type of equipment requires a
H/H license in Mass? - (ANSWER)10 feet or either, 1/4 cu/yd 500 pounds
What type of system is used when working on de-energized circuitry? - (ANSWER)Lock out/Tag out
All welding and cutting on hoisting equipment must be done in accordance with what code? -
(ANSWER)1998 ASME Chapter IX
What type of protection is required for hoisting operation? - (ANSWER)ROPS, Heat, Seatbelts,
Shatterproof Glass, and Hardhats
What regulatory authority governs hoisting in Mass? - (ANSWER)520 CMR 6.00
What does CMR stand for? - (ANSWER)Code of Massachusetts Regulation
What chapter applies to Hoisting? - (ANSWER)Chapter 146 section 53-54A
When loading a 10 wheeler; how do you approach the truck? - (ANSWER)Low and Slow, load front to
back
How do you carry the load? - (ANSWER)Close to the ground
How close can you mechanically dig to a known utility? - (ANSWER)18"
,Massachusetts 2A Hoisting License Exam Questions and Answers 2026/2027
A+ Grade | Complete 2A Hoisting License Certification Study Guide
When driving a loader down hill, what should you not do? - (ANSWER)Raise the bucket or put the
machine in neutral
When filling a trench should you use the backhoe bucket in a sweeping motion? - (ANSWER)No it can
cause mechanical failure
What are supper extensions used for? - (ANSWER)To dig deeper
When rowing, not trailing a backhoe or ladder; what speed should you not exceed? - (ANSWER)5 mph
What does articulate mean on a wheel loader? - (ANSWER)Bends in the middle
What is the "slow moving triangle" and what speed can they not exceed? - (ANSWER)Red triangle with
orange center, 25 mph
What is coupling the brakes? - (ANSWER)Locking the brakes together, used when traveling on the road
Can you run a machine inside a building? - (ANSWER)Yes with scrubbers, adequate ventilation, and
monitoring
Scavenging air is what? - (ANSWER)Taking in air naturally
Supercharging air is what? - (ANSWER)Supercharging air is forcing in air
How does fuel in a gas engine ignite? - (ANSWER)Heat, Spark and Combustion
What OSHA rules govern rigging equipment? - (ANSWER)OSHA 1926.251
, Massachusetts 2A Hoisting License Exam Questions and Answers 2026/2027
A+ Grade | Complete 2A Hoisting License Certification Study Guide
What does a governor do on a engine? - (ANSWER)Controls the RPM
What causes starving on a hydraulic system? - (ANSWER)Low fluid, dirty filter,leak, or kinked hoses
Name 5 requirements for refueling hoisting equipment? - (ANSWER)Shut off the engine, transmission in
Neutral, set the brake, no smoking and ensure all parts are lowered to the ground
May chains be used afore hoisting? - (ANSWER)No, only chain slings
What do you look for before setting up a lull for pick? - (ANSWER)Power lines, Soft areas, Workers,
Grates and Moving Vechicles
What do you look for before digging? - (ANSWER)Soft soil, wet areas, power lines, dig safe marks, Wells,
lights, "read the street"
What do you do with open trenches at the end of the day? - (ANSWER)Protect the public from the
trench i.e. Jackie's Law
What is the purpose of a thimble in rigging? - (ANSWER)It stops the loop from crushing
What is the proper way to exit a machine? - (ANSWER)3 points of contact
What is the 3 point of contact? - (ANSWER)Two feet one hand, or two hands one foot, on the ladder at
all time
A+ Grade | Complete 2A Hoisting License Certification Study Guide
How many pounds in a ton? - (ANSWER)2000 pounds
What type of equipment requires a
H/H license in Mass? - (ANSWER)10 feet or either, 1/4 cu/yd 500 pounds
What type of system is used when working on de-energized circuitry? - (ANSWER)Lock out/Tag out
All welding and cutting on hoisting equipment must be done in accordance with what code? -
(ANSWER)1998 ASME Chapter IX
What type of protection is required for hoisting operation? - (ANSWER)ROPS, Heat, Seatbelts,
Shatterproof Glass, and Hardhats
What regulatory authority governs hoisting in Mass? - (ANSWER)520 CMR 6.00
What does CMR stand for? - (ANSWER)Code of Massachusetts Regulation
What chapter applies to Hoisting? - (ANSWER)Chapter 146 section 53-54A
When loading a 10 wheeler; how do you approach the truck? - (ANSWER)Low and Slow, load front to
back
How do you carry the load? - (ANSWER)Close to the ground
How close can you mechanically dig to a known utility? - (ANSWER)18"
,Massachusetts 2A Hoisting License Exam Questions and Answers 2026/2027
A+ Grade | Complete 2A Hoisting License Certification Study Guide
When driving a loader down hill, what should you not do? - (ANSWER)Raise the bucket or put the
machine in neutral
When filling a trench should you use the backhoe bucket in a sweeping motion? - (ANSWER)No it can
cause mechanical failure
What are supper extensions used for? - (ANSWER)To dig deeper
When rowing, not trailing a backhoe or ladder; what speed should you not exceed? - (ANSWER)5 mph
What does articulate mean on a wheel loader? - (ANSWER)Bends in the middle
What is the "slow moving triangle" and what speed can they not exceed? - (ANSWER)Red triangle with
orange center, 25 mph
What is coupling the brakes? - (ANSWER)Locking the brakes together, used when traveling on the road
Can you run a machine inside a building? - (ANSWER)Yes with scrubbers, adequate ventilation, and
monitoring
Scavenging air is what? - (ANSWER)Taking in air naturally
Supercharging air is what? - (ANSWER)Supercharging air is forcing in air
How does fuel in a gas engine ignite? - (ANSWER)Heat, Spark and Combustion
What OSHA rules govern rigging equipment? - (ANSWER)OSHA 1926.251
, Massachusetts 2A Hoisting License Exam Questions and Answers 2026/2027
A+ Grade | Complete 2A Hoisting License Certification Study Guide
What does a governor do on a engine? - (ANSWER)Controls the RPM
What causes starving on a hydraulic system? - (ANSWER)Low fluid, dirty filter,leak, or kinked hoses
Name 5 requirements for refueling hoisting equipment? - (ANSWER)Shut off the engine, transmission in
Neutral, set the brake, no smoking and ensure all parts are lowered to the ground
May chains be used afore hoisting? - (ANSWER)No, only chain slings
What do you look for before setting up a lull for pick? - (ANSWER)Power lines, Soft areas, Workers,
Grates and Moving Vechicles
What do you look for before digging? - (ANSWER)Soft soil, wet areas, power lines, dig safe marks, Wells,
lights, "read the street"
What do you do with open trenches at the end of the day? - (ANSWER)Protect the public from the
trench i.e. Jackie's Law
What is the purpose of a thimble in rigging? - (ANSWER)It stops the loop from crushing
What is the proper way to exit a machine? - (ANSWER)3 points of contact
What is the 3 point of contact? - (ANSWER)Two feet one hand, or two hands one foot, on the ladder at
all time
