CTD 221-001 FINAL EXAM QUESTIONS AND
ANSWERS
User fatigue - Answers - Static Control Flooring reduces the occurrence of all of the
following except
user fatigue
fire and explosions
equipment malfunction
component/part failure
Plainsawing - Answers - what creates the least waste of any sawing method, and is the
least expensive, and most common method of sawing wood flooring?
Parquet flooring - Answers - what is a series of wood flooring pieces that create a
geometric design?
Yellow pine - Answers - Which of the following would be considered a coniferous tree?
white oak
yellow birch
yellow pine
black walnut
true - Answers - Rift sawing results in the least board-feet per log, making it the most
expensive milling
Pine - Answers - Which of the following is not a material used to manufacture resilient
flooring?
vinyl
linoleum
pine
leather
B grade - Answers - FPL Hardwood Veneer Grades denotes wood that is smooth and
free of open defects, with some distorted grain, sound discolorations, and insect
damage limited in size, number. what grade?
COF - Answers - is the measurement of resistance to friction as related to the effect of
how smooth or rough a surface is to prevent slipping on the material.
false - Answers - Cork is a natural flooring made from linseeds, wood flour or cork dust,
calcium carbonate, and other additives
true - Answers - Book-matched Is sequenced veneers alternately laid face up and face
down to produce symmetrical mirror images.
, true - Answers - Cylinder glass- was produced by blowing a hollow glass sphere and
swinging it to produce a cylinder; the ends were cut off and the cylinder was cut
lengthwise and opened up flat.
Crown glass - Answers - In this early glass manufacturing process
_________________was blown as a sphere and spun into a disk.
Cylinder glass production - Answers - Which of the following is not one of the three
common glass productions methods.
Ceramic glass - Answers - Is clear glass with high impact resistance and is sometimes
used in laminated assemblies.
Float glass production - Answers - The term ______________derives from the
production method, introduced in the UK by Sir Alastair Pilkington in 1959, by which
process 90% of today's flat glass is manufactured.
true - Answers - Where there is a risk of hazard in the event that glazing is not seen,
decorative designs can be applied to glass at heights specified in codes.
true - Answers - Codes regulate the size, thickness, location, and types of glazing.
False - Answers - Fire-rated glazing is assessed for its ability to shatter into small
pieces in a fire.
False - Answers - Acoustical glass is laminated glass consisting of several layers of
glass and/or polycarbonate plastic bonded together under heat and pressure with an
interlayer of polyvinyl butyral or polyurethane plastic
Insulated - Answers - _____________ or AKA double glazing as it is more commonly
referred to consists of two sheets of glass separated by a sealed inner core filled with
air which provides insulation.
false - Answers - Plating refers to surface textures and effects are achieved by a
number of processes
true - Answers - Copper is non-ferrous.
false - Answers - Aluminum is an alloy used to alter other metals
false - Answers - In forging molten metal is poured into a mold
Zinc - Answers - Which of the following metals is non-ferrous?
ANSWERS
User fatigue - Answers - Static Control Flooring reduces the occurrence of all of the
following except
user fatigue
fire and explosions
equipment malfunction
component/part failure
Plainsawing - Answers - what creates the least waste of any sawing method, and is the
least expensive, and most common method of sawing wood flooring?
Parquet flooring - Answers - what is a series of wood flooring pieces that create a
geometric design?
Yellow pine - Answers - Which of the following would be considered a coniferous tree?
white oak
yellow birch
yellow pine
black walnut
true - Answers - Rift sawing results in the least board-feet per log, making it the most
expensive milling
Pine - Answers - Which of the following is not a material used to manufacture resilient
flooring?
vinyl
linoleum
pine
leather
B grade - Answers - FPL Hardwood Veneer Grades denotes wood that is smooth and
free of open defects, with some distorted grain, sound discolorations, and insect
damage limited in size, number. what grade?
COF - Answers - is the measurement of resistance to friction as related to the effect of
how smooth or rough a surface is to prevent slipping on the material.
false - Answers - Cork is a natural flooring made from linseeds, wood flour or cork dust,
calcium carbonate, and other additives
true - Answers - Book-matched Is sequenced veneers alternately laid face up and face
down to produce symmetrical mirror images.
, true - Answers - Cylinder glass- was produced by blowing a hollow glass sphere and
swinging it to produce a cylinder; the ends were cut off and the cylinder was cut
lengthwise and opened up flat.
Crown glass - Answers - In this early glass manufacturing process
_________________was blown as a sphere and spun into a disk.
Cylinder glass production - Answers - Which of the following is not one of the three
common glass productions methods.
Ceramic glass - Answers - Is clear glass with high impact resistance and is sometimes
used in laminated assemblies.
Float glass production - Answers - The term ______________derives from the
production method, introduced in the UK by Sir Alastair Pilkington in 1959, by which
process 90% of today's flat glass is manufactured.
true - Answers - Where there is a risk of hazard in the event that glazing is not seen,
decorative designs can be applied to glass at heights specified in codes.
true - Answers - Codes regulate the size, thickness, location, and types of glazing.
False - Answers - Fire-rated glazing is assessed for its ability to shatter into small
pieces in a fire.
False - Answers - Acoustical glass is laminated glass consisting of several layers of
glass and/or polycarbonate plastic bonded together under heat and pressure with an
interlayer of polyvinyl butyral or polyurethane plastic
Insulated - Answers - _____________ or AKA double glazing as it is more commonly
referred to consists of two sheets of glass separated by a sealed inner core filled with
air which provides insulation.
false - Answers - Plating refers to surface textures and effects are achieved by a
number of processes
true - Answers - Copper is non-ferrous.
false - Answers - Aluminum is an alloy used to alter other metals
false - Answers - In forging molten metal is poured into a mold
Zinc - Answers - Which of the following metals is non-ferrous?
