Dante Platform Mini Test Questions -
Dante Bas e Tes t ing Level 1 Guide 2026
1. What type of AV devices are the Ulti- Low channel count endpoints
mo X and ProS1 designed for?
Ultimo X and ProS1 are entry-level chipsets ideal for
microphones, loudspeakers, and similar devices.
2. True or False: The Dante Managed True
API allows integration of third-par-
ty devices and apps into Dante net- The Dante Managed API enables third-party control
works. and monitoring of Dante device subscriptions.
3. Where is Audinate headquartered? Sydney, Australia
Dante serves the AV industry with IP networking solu-
tions.
4. True or False: Latency is the same in False
all Dante devices, regardless of con-
figuration. Dante devices can have ditterent latency settings per
connection, which are viewable and adjustable in
Dante Controller.
5. Which of the following factors does Direct connections between devices.
NOT typically increase latency in a
network? Direct connections can reduce latency. In contrast,
network congestion, more switch hops, and process-
- Number of switch hops ing overhead can all increase latency.
- Network congestion
- Higher sample rates
- Direct connections between devices
6. True or False: In a corporate setup, True
latency can be varied across zones to
suit distance and switch count. This allows local areas to use low latency, while more
, Dante Platform Mini Test Questions -
Dante Bas e Tes t ing Level 1 Guide 2026
distant zones can use longer latency to ensure smooth
delivery.
7. Why might a device default to 1ms All Dante devices default to a 1ms latency setting
latency even if it supports 0.25ms?
All Dante devices default to 1ms latency, and users
may (choose) not (to) adjust this setting, even if a
lower latency is supported and achievable.
8. Which latency value will Dante use The higher value
when transmitter and receiver have
different settings? When latency settings ditter between transmitter and
receiver, Dante uses the longer of the two to ensure
reliable signal delivery.
9. What causes Dante Virtual Sound- It runs in a multitasking compute environment
card to require higher latency?
Software solutions like DVS, Studio, and VIA run on
CPUs that multitask, requiring more latency to ac-
count for process scheduling and competition.
10. What does it mean that Dante laten- You can precisely set and predict the delay
cy is deterministic?
Dante latency is deterministic, meaning the delay is
fixed and predictable, allowing for tight synchroniza-
tion and phase accuracy.
11. Which tab in Device View allows you Device Config
to rename a Dante device?
Renaming devices is done under the Device Config
tab in the Device View window.
12. The device that was previously subscribed is offline,
or the name of the device has changed.
, Dante Platform Mini Test Questions -
Dante Bas e Tes t ing Level 1 Guide 2026
If you see a triangle with an exclama-
tion mark icon in Dante Controller, So, this icon often appears when a device previously
what could it indicate? involved in a subscription becomes offline, meaning
Dante can't route audio to or from it. Also, when a
name change occurs in a device, this breaks the ref-
erence used in the subscription, which causes Dante
Controller to flag it.
13. True or False: Dante Controller will True
prevent subscriptions between de-
vices with mismatched sample rates. Subscriptions cannot be made between devices with
mismtached sample rates.
14. What might a circle with a slash icon Channel format does not match
on a Dante subscription mean?
A circle with a slash indicates incompatible channel
formats-usually a sample rate mismatch.
15. True or False: Dante Controller auto- True
matically discovers Dante devices on
the network. Dante Controller uses mDNS and other discovery pro-
tocols to automatically detect Dante-enabled devices
on the same subnet. No manual scanning or IP entry
is needed for basic discovery.
16. In Dante Controller, what type of in- Traflc rates and latency settings
formation is found under "Network
Status?"
17. In Dante Controller, what type of in- Clock leader and sync status
formation is found under "Clock Sta-
tus?"
18. Firmware, model number, port speed
Dante Bas e Tes t ing Level 1 Guide 2026
1. What type of AV devices are the Ulti- Low channel count endpoints
mo X and ProS1 designed for?
Ultimo X and ProS1 are entry-level chipsets ideal for
microphones, loudspeakers, and similar devices.
2. True or False: The Dante Managed True
API allows integration of third-par-
ty devices and apps into Dante net- The Dante Managed API enables third-party control
works. and monitoring of Dante device subscriptions.
3. Where is Audinate headquartered? Sydney, Australia
Dante serves the AV industry with IP networking solu-
tions.
4. True or False: Latency is the same in False
all Dante devices, regardless of con-
figuration. Dante devices can have ditterent latency settings per
connection, which are viewable and adjustable in
Dante Controller.
5. Which of the following factors does Direct connections between devices.
NOT typically increase latency in a
network? Direct connections can reduce latency. In contrast,
network congestion, more switch hops, and process-
- Number of switch hops ing overhead can all increase latency.
- Network congestion
- Higher sample rates
- Direct connections between devices
6. True or False: In a corporate setup, True
latency can be varied across zones to
suit distance and switch count. This allows local areas to use low latency, while more
, Dante Platform Mini Test Questions -
Dante Bas e Tes t ing Level 1 Guide 2026
distant zones can use longer latency to ensure smooth
delivery.
7. Why might a device default to 1ms All Dante devices default to a 1ms latency setting
latency even if it supports 0.25ms?
All Dante devices default to 1ms latency, and users
may (choose) not (to) adjust this setting, even if a
lower latency is supported and achievable.
8. Which latency value will Dante use The higher value
when transmitter and receiver have
different settings? When latency settings ditter between transmitter and
receiver, Dante uses the longer of the two to ensure
reliable signal delivery.
9. What causes Dante Virtual Sound- It runs in a multitasking compute environment
card to require higher latency?
Software solutions like DVS, Studio, and VIA run on
CPUs that multitask, requiring more latency to ac-
count for process scheduling and competition.
10. What does it mean that Dante laten- You can precisely set and predict the delay
cy is deterministic?
Dante latency is deterministic, meaning the delay is
fixed and predictable, allowing for tight synchroniza-
tion and phase accuracy.
11. Which tab in Device View allows you Device Config
to rename a Dante device?
Renaming devices is done under the Device Config
tab in the Device View window.
12. The device that was previously subscribed is offline,
or the name of the device has changed.
, Dante Platform Mini Test Questions -
Dante Bas e Tes t ing Level 1 Guide 2026
If you see a triangle with an exclama-
tion mark icon in Dante Controller, So, this icon often appears when a device previously
what could it indicate? involved in a subscription becomes offline, meaning
Dante can't route audio to or from it. Also, when a
name change occurs in a device, this breaks the ref-
erence used in the subscription, which causes Dante
Controller to flag it.
13. True or False: Dante Controller will True
prevent subscriptions between de-
vices with mismatched sample rates. Subscriptions cannot be made between devices with
mismtached sample rates.
14. What might a circle with a slash icon Channel format does not match
on a Dante subscription mean?
A circle with a slash indicates incompatible channel
formats-usually a sample rate mismatch.
15. True or False: Dante Controller auto- True
matically discovers Dante devices on
the network. Dante Controller uses mDNS and other discovery pro-
tocols to automatically detect Dante-enabled devices
on the same subnet. No manual scanning or IP entry
is needed for basic discovery.
16. In Dante Controller, what type of in- Traflc rates and latency settings
formation is found under "Network
Status?"
17. In Dante Controller, what type of in- Clock leader and sync status
formation is found under "Clock Sta-
tus?"
18. Firmware, model number, port speed
