NACE CIP Actual Questions and Correct Answers
Q1
What is the first preferred course of action if small blisters are noticed in a tank lining?
Answer: Document the problem and advise the Contractor and Owner's representative.
Q2
What is dew point?
Answer: The temperature at which condensation occurs.
Q3
What should a coating inspector perform if a poorly maintainedcompressor is used?
Answer: A blotter test for the presence of oil and water.
Q4
What should an inspector do upon arrival of coating materials?
Answer: Observe and document the amount of material and batch numbers.
Q5
What is relative humidity?
Answer: A measure of the amount of moisture in the air compared to saturation level.
Q6
Galvanic corrosion occurs on which substrate?
Answer: Metal.
Q7
Which specification is most likely referenced when applying Thermal Spray Coatings?
Answer: SSPC-CS 23.00/AWS C2.23/NACE No. 12.
, Q8
What is the minimum recommended
Answer: 2.5 cm (1 inch).
Q9
What is polymerization?
Answer: The process of monomers joining together.
Q10
What is an exposed area of the
Answer: Holiday.
Q11
What is checking in coatings?
Answer: A fine crack in the surface of a coating that rarely reaches the substrate.
Q12
Why is inspection documentation
Answer: Owners use the documentation for a variety of
Q13
What should an inspector's personal
Answer: No comments regarding the application team.
Q14
What should you do if asked to
Answer: Meet with the prospective employer to determine
Q15
What information can good records
Answer: What items were coated.
Q1
What is the first preferred course of action if small blisters are noticed in a tank lining?
Answer: Document the problem and advise the Contractor and Owner's representative.
Q2
What is dew point?
Answer: The temperature at which condensation occurs.
Q3
What should a coating inspector perform if a poorly maintainedcompressor is used?
Answer: A blotter test for the presence of oil and water.
Q4
What should an inspector do upon arrival of coating materials?
Answer: Observe and document the amount of material and batch numbers.
Q5
What is relative humidity?
Answer: A measure of the amount of moisture in the air compared to saturation level.
Q6
Galvanic corrosion occurs on which substrate?
Answer: Metal.
Q7
Which specification is most likely referenced when applying Thermal Spray Coatings?
Answer: SSPC-CS 23.00/AWS C2.23/NACE No. 12.
, Q8
What is the minimum recommended
Answer: 2.5 cm (1 inch).
Q9
What is polymerization?
Answer: The process of monomers joining together.
Q10
What is an exposed area of the
Answer: Holiday.
Q11
What is checking in coatings?
Answer: A fine crack in the surface of a coating that rarely reaches the substrate.
Q12
Why is inspection documentation
Answer: Owners use the documentation for a variety of
Q13
What should an inspector's personal
Answer: No comments regarding the application team.
Q14
What should you do if asked to
Answer: Meet with the prospective employer to determine
Q15
What information can good records
Answer: What items were coated.
