7A General Pest Control – Unit 7: Application &
Management Equipment (Test Your Knowledge) | Actual
Exam Questions & 100% Correct Answers | Latest Update
2026 | Certification Exam Prep
1. Describe how proper calibration of spray equipment can impact pest control
effectiveness.
Proper calibration only affects the speed of application, not the
effectiveness.
Proper calibration ensures that the correct amount of pesticide is
applied, minimizing waste and maximizing effectiveness.
Proper calibration is only important for large-scale applications.
Proper calibration is unnecessary if the equipment is new.
2. If a pest control technician is not seeing results from their baiting efforts,
which factor should they consider adjusting to improve effectiveness?
The color of the bait station
The type of bait used
The frequency of equipment maintenance
The size of the traps
3. What is one key precaution to take when storing aerosol containers?
Keep in direct sunlight to prevent rust.
Place near electrical appliances for easy access.
Store in a cool, dry place away from heat sources.
Store in a damp environment to maintain humidity.
,4. Describe how using the appropriate size of a trigger trap can impact pest
control effectiveness.
The size of the trap does not affect its effectiveness.
Smaller traps are easier to set up and maintain.
Using a larger trap can capture multiple species at once.
Using the correct size of a trigger trap increases the likelihood of
capturing the target rodent, leading to more effective pest control.
5. What is a pin-stream nozzle primarily used for in pest control applications?
Targeted applications for specific pests.
Soil drenching.
General area treatments.
Indoor fogging.
6. List three types of hand dusters used in pest control.
Spray duster, electric duster, and foam duster.
Liquid duster, aerosol duster, and gel duster.
Mechanical duster, manual duster, and automatic duster.
Bulb duster, power duster, and hand-held duster.
7. If a pest control technician is tasked with managing a rodent infestation in a
residential area, how might they effectively utilize bait stations?
By strategically placing bait stations in areas where rodent activity is
observed.
By using bait stations only in open areas to maximize visibility.
, By relying solely on traps without using bait stations.
By applying bait stations in areas with high human traffic to ensure
effectiveness.
8. What is the primary purpose of calibrating a sprayer in pest control?
To increase the pressure of the sprayer.
To change the type of nozzle used.
To clean the sprayer after use.
To ensure accurate application rates of pesticides.
9. What is the primary function of a trigger trap in pest control?
To store bait.
To monitor pest activity.
To catch pests such as rodents.
To spray pesticides.
10. Describe how the choice of bait can impact the success of pest control
efforts.
The choice of bait has no impact on the success of pest control.
The choice of bait affects the likelihood of attracting the target
pests, which is crucial for effective control.
The choice of bait only matters for visual appeal.
The choice of bait determines the size of the bait station required.
11. If a pest control technician notices a decrease in spray pressure, what
maintenance action should they take regarding the power sprayer?
, Inspect and replace worn hoses or nozzles.
Change the oil in the sprayer.
Increase the engine speed.
Add more fuel to the sprayer.
12. Why is it important to store aerosol containers away from heat sources?
Heat prevents the containers from rusting.
Heat can cause the pressure inside the aerosol containers to
increase, leading to potential explosions.
Heat has no effect on aerosol containers.
Heat helps to maintain the effectiveness of the chemicals inside.
13. Which components of a compressed-air sprayer are essential to check for
regular maintenance?
Filters and batteries
Hoses, nozzles, and pressure gauges
Paint and exterior finish
Wheels and handles
14. Describe the specific advantages of using a bulb duster for crack and
crevice applications in pest control.
A bulb duster is designed for large area coverage, making it less
effective for targeted applications.
A bulb duster is primarily used for spraying liquids rather than
applying dust.
Management Equipment (Test Your Knowledge) | Actual
Exam Questions & 100% Correct Answers | Latest Update
2026 | Certification Exam Prep
1. Describe how proper calibration of spray equipment can impact pest control
effectiveness.
Proper calibration only affects the speed of application, not the
effectiveness.
Proper calibration ensures that the correct amount of pesticide is
applied, minimizing waste and maximizing effectiveness.
Proper calibration is only important for large-scale applications.
Proper calibration is unnecessary if the equipment is new.
2. If a pest control technician is not seeing results from their baiting efforts,
which factor should they consider adjusting to improve effectiveness?
The color of the bait station
The type of bait used
The frequency of equipment maintenance
The size of the traps
3. What is one key precaution to take when storing aerosol containers?
Keep in direct sunlight to prevent rust.
Place near electrical appliances for easy access.
Store in a cool, dry place away from heat sources.
Store in a damp environment to maintain humidity.
,4. Describe how using the appropriate size of a trigger trap can impact pest
control effectiveness.
The size of the trap does not affect its effectiveness.
Smaller traps are easier to set up and maintain.
Using a larger trap can capture multiple species at once.
Using the correct size of a trigger trap increases the likelihood of
capturing the target rodent, leading to more effective pest control.
5. What is a pin-stream nozzle primarily used for in pest control applications?
Targeted applications for specific pests.
Soil drenching.
General area treatments.
Indoor fogging.
6. List three types of hand dusters used in pest control.
Spray duster, electric duster, and foam duster.
Liquid duster, aerosol duster, and gel duster.
Mechanical duster, manual duster, and automatic duster.
Bulb duster, power duster, and hand-held duster.
7. If a pest control technician is tasked with managing a rodent infestation in a
residential area, how might they effectively utilize bait stations?
By strategically placing bait stations in areas where rodent activity is
observed.
By using bait stations only in open areas to maximize visibility.
, By relying solely on traps without using bait stations.
By applying bait stations in areas with high human traffic to ensure
effectiveness.
8. What is the primary purpose of calibrating a sprayer in pest control?
To increase the pressure of the sprayer.
To change the type of nozzle used.
To clean the sprayer after use.
To ensure accurate application rates of pesticides.
9. What is the primary function of a trigger trap in pest control?
To store bait.
To monitor pest activity.
To catch pests such as rodents.
To spray pesticides.
10. Describe how the choice of bait can impact the success of pest control
efforts.
The choice of bait has no impact on the success of pest control.
The choice of bait affects the likelihood of attracting the target
pests, which is crucial for effective control.
The choice of bait only matters for visual appeal.
The choice of bait determines the size of the bait station required.
11. If a pest control technician notices a decrease in spray pressure, what
maintenance action should they take regarding the power sprayer?
, Inspect and replace worn hoses or nozzles.
Change the oil in the sprayer.
Increase the engine speed.
Add more fuel to the sprayer.
12. Why is it important to store aerosol containers away from heat sources?
Heat prevents the containers from rusting.
Heat can cause the pressure inside the aerosol containers to
increase, leading to potential explosions.
Heat has no effect on aerosol containers.
Heat helps to maintain the effectiveness of the chemicals inside.
13. Which components of a compressed-air sprayer are essential to check for
regular maintenance?
Filters and batteries
Hoses, nozzles, and pressure gauges
Paint and exterior finish
Wheels and handles
14. Describe the specific advantages of using a bulb duster for crack and
crevice applications in pest control.
A bulb duster is designed for large area coverage, making it less
effective for targeted applications.
A bulb duster is primarily used for spraying liquids rather than
applying dust.
