FIREFIGHTER 1 AND 2 EXAM SETS COMBINED ACTUAL
QUESTIONS AND ANSWERS(ACE IN THE FIREFIGHTER
TEST 100% VERIFIED)
When rescuing an unconscious child or small adult from a window, how many rescuers enter
the window to assist the victim?
A. 3
B. 1
C. 0
D. 2 Ans✔👍- D. 2
When cutting through a roof, a firefighter should avoid:
A. removing the built-up material prior to cutting
B. cutting through joists, rafters, or trusses
C. making one large opening
D. using a power saw Ans✔👍- B. cutting through joists, rafters, or trusses
Which of the following is an advantage of the flat load?
A. Only four people are required to perform the load
B. It is the best way to load large-diameter hose
C. Hose loaded in this manner has fewer sharp bends than other loads
D. Hose for shoulder carries can easily be taken from the load Ans✔👍- B. It is the best way
to load large-diameter hose
Which of the following statements IS CORRECT regarding fire extinguishers and combustible
metals?
A. All chemical agents need to be applied with a shovel or scoop
,B. No single agent will control or extinguish fires in all combustible metals
C. The agent needs to break the crust that may form over any burning metal to extinguish the
fire
D. They come in pressurized and handheld models Ans✔👍- B. No single agent will control or
extinguish fires in all combustible metals
A common factor with regard to multiple firefighter deaths at emergency incidents is:
A. the lack of an organized, effective command structure
B. they all involved industrial complexes
C. all the incidents occurred during forest fires
D. they all occurred in urban settings Ans✔👍- A. the lack of an organized, effective command
structure
Which of the following is one of the stages/phases of fire burn?
A. Rollover
B. Fully developed
C. Backdraft
D. Initial Ans✔👍- B. Fully developed
Which of the following IS TRUE regarding personal protective clothing?
A. It requires firefighters to wear the most appropriate PPE for the hazard they face
B. It must comply with NFPA 1900 standard
C. It prevents a firefighter from burns in situations such as flashover
D. It requires PASS activation whenever bunker gear is worn Ans✔👍- A. It requires
firefighters to wear the most appropriate PPE for the hazard they face
A fire CANNOT BE considered fully extinguished until is complete.
A. overhaul
,B. primary search
C. cause determination
D. secondary search Ans✔👍- A. overhaul
For an area to qualify as a light hazard, the majority of materials must meet one
requirements. One of those is that they must:
A. be UL listed
B. have ignition temperatures in excess of 451F
C. be necessary for the work of the area
D. be noncombustible Ans✔👍- D. be noncombustible
What type of listening is required by a telecommunicator to draw out all the necessary
information from a caller who may be excited, confused, or dealing with a language barrier?
A. Presumptive
B. Active
C. Selective
D. Modal Ans✔👍- B. Active
After a roof has been opened up, the firefighter must:
A. remove any natural roof openings
B. make another opening on the opposite side of the pitched roof
C. ensure the ceiling below the cut is opened
D. direct a hose line into the opening Ans✔👍- C. ensure the ceiling below the cut is opened
How are flammability limits and explosive limits related?
A. Explosive limits are used to calculate flammability limits
B. The two terms are neither mathematically nor conceptually related.
C. They are interchangeable terms meaning the same thing
, D. Flammability limits are used to calculate explosive limits Ans✔👍- C. They are
interchangeable terms meaning the same thing
A load the engineer planned for, or anticipated, in the building design is the definition of a(n)
load.
A. dead
B. concentrated
C. impact
D. design Ans✔👍- D. design
What type of standpipe is intended for fire department use only?
A. Group 5
B. Type II
C. Class I
D. Level D Ans✔👍- B. Type II
What types of locking devices usually ARE NOT detected by the forcible entry team?
A. Mortise locks
B. Auxiliary locking devices
C. Padlocks
D. Rim Locks Ans✔👍- B. Auxiliary locking devices
Which of the following IS TRUE regarding hoisting tools and equipment?
A. Use edge roller over sharp edges to prevent physical damage to rope
B. Fire extinguishers and SCBS should not be hoisted
C. When working with heights, use teams to ensure safety
D. Use hand over hand method to control rope when hoisting Ans✔👍- B. Fire extinguishers
and SCBS should not be hoisted
QUESTIONS AND ANSWERS(ACE IN THE FIREFIGHTER
TEST 100% VERIFIED)
When rescuing an unconscious child or small adult from a window, how many rescuers enter
the window to assist the victim?
A. 3
B. 1
C. 0
D. 2 Ans✔👍- D. 2
When cutting through a roof, a firefighter should avoid:
A. removing the built-up material prior to cutting
B. cutting through joists, rafters, or trusses
C. making one large opening
D. using a power saw Ans✔👍- B. cutting through joists, rafters, or trusses
Which of the following is an advantage of the flat load?
A. Only four people are required to perform the load
B. It is the best way to load large-diameter hose
C. Hose loaded in this manner has fewer sharp bends than other loads
D. Hose for shoulder carries can easily be taken from the load Ans✔👍- B. It is the best way
to load large-diameter hose
Which of the following statements IS CORRECT regarding fire extinguishers and combustible
metals?
A. All chemical agents need to be applied with a shovel or scoop
,B. No single agent will control or extinguish fires in all combustible metals
C. The agent needs to break the crust that may form over any burning metal to extinguish the
fire
D. They come in pressurized and handheld models Ans✔👍- B. No single agent will control or
extinguish fires in all combustible metals
A common factor with regard to multiple firefighter deaths at emergency incidents is:
A. the lack of an organized, effective command structure
B. they all involved industrial complexes
C. all the incidents occurred during forest fires
D. they all occurred in urban settings Ans✔👍- A. the lack of an organized, effective command
structure
Which of the following is one of the stages/phases of fire burn?
A. Rollover
B. Fully developed
C. Backdraft
D. Initial Ans✔👍- B. Fully developed
Which of the following IS TRUE regarding personal protective clothing?
A. It requires firefighters to wear the most appropriate PPE for the hazard they face
B. It must comply with NFPA 1900 standard
C. It prevents a firefighter from burns in situations such as flashover
D. It requires PASS activation whenever bunker gear is worn Ans✔👍- A. It requires
firefighters to wear the most appropriate PPE for the hazard they face
A fire CANNOT BE considered fully extinguished until is complete.
A. overhaul
,B. primary search
C. cause determination
D. secondary search Ans✔👍- A. overhaul
For an area to qualify as a light hazard, the majority of materials must meet one
requirements. One of those is that they must:
A. be UL listed
B. have ignition temperatures in excess of 451F
C. be necessary for the work of the area
D. be noncombustible Ans✔👍- D. be noncombustible
What type of listening is required by a telecommunicator to draw out all the necessary
information from a caller who may be excited, confused, or dealing with a language barrier?
A. Presumptive
B. Active
C. Selective
D. Modal Ans✔👍- B. Active
After a roof has been opened up, the firefighter must:
A. remove any natural roof openings
B. make another opening on the opposite side of the pitched roof
C. ensure the ceiling below the cut is opened
D. direct a hose line into the opening Ans✔👍- C. ensure the ceiling below the cut is opened
How are flammability limits and explosive limits related?
A. Explosive limits are used to calculate flammability limits
B. The two terms are neither mathematically nor conceptually related.
C. They are interchangeable terms meaning the same thing
, D. Flammability limits are used to calculate explosive limits Ans✔👍- C. They are
interchangeable terms meaning the same thing
A load the engineer planned for, or anticipated, in the building design is the definition of a(n)
load.
A. dead
B. concentrated
C. impact
D. design Ans✔👍- D. design
What type of standpipe is intended for fire department use only?
A. Group 5
B. Type II
C. Class I
D. Level D Ans✔👍- B. Type II
What types of locking devices usually ARE NOT detected by the forcible entry team?
A. Mortise locks
B. Auxiliary locking devices
C. Padlocks
D. Rim Locks Ans✔👍- B. Auxiliary locking devices
Which of the following IS TRUE regarding hoisting tools and equipment?
A. Use edge roller over sharp edges to prevent physical damage to rope
B. Fire extinguishers and SCBS should not be hoisted
C. When working with heights, use teams to ensure safety
D. Use hand over hand method to control rope when hoisting Ans✔👍- B. Fire extinguishers
and SCBS should not be hoisted
