Ammo 51 Course MV-DL Questions and Answers 100%...
Ammo 51 Course MV-DL Practice Questions and Answers
Instructions: Select the best answer for each question.
Topic 1: Vehicle Inspection and DD Form 626
1. What form is used for the inspection of motor vehicles and cargo spaces
transporting ammunition and explosives?
A) DA Form 581
B) DD Form 626
C) DA Form 3151-R
D) DD Form 2890
Answer: B) DD Form 626
Rationale: DD Form 626 is the official form for mechanical inspection of motor
vehicles and cargo spaces used to transport ammunition and explosives (A&E). It
provides documentation that the vehicle meets safety requirements at origin and
destination .
,2. During an inbound inspection, you see one of the door seals is damaged and
appears to have been cut open. What action should you take?
A) Ignore it if the cargo appears intact
B) Contact the origin shipper immediately
C) Move the vehicle to an isolated location and contact security
D) Complete the inspection and accept the load
Answer: C) Move the vehicle to an isolated location and contact security
Rationale: A damaged or tampered door seal indicates a potential security breach.
The proper procedure is to isolate the vehicle and immediately contact security
personnel for investigation .
3. A military explosives driver needs to transport A&E to a range that is 20 miles
from the station. Can she complete the DD Form 626 inspection herself?
,A) No, only certified inspectors can complete the form
B) Yes, but only if transported in a Navy or DoD vehicle
C) Yes, regardless of vehicle type
D) No, the driver is never permitted to self-inspect
Answer: B) Yes, but only if transported in a Navy or DoD vehicle
Rationale: Drivers may complete the DD Form 626 inspection themselves when
transporting A&E in Navy or Department of Defense vehicles .
4. What is the purpose of DD Form 626?
A) To request ammunition from the ASP
B) To provide for mechanical inspection of the motor vehicle and cargo spaces
C) To document ammunition turn-in
, D) To track lost or damaged ammunition
Answer: B) To provide for mechanical inspection of the motor vehicle and cargo
spaces
Rationale: The primary purpose of DD Form 626 is to document mechanical
inspections of vehicles and cargo spaces used for transporting ammunition and
explosives .
5. A truck carrying A&E has just arrived. Someone directed the driver to park in a
designated location inside the installation. Is this acceptable?
A) Yes, if it's a designated location
B) No, the truck must remain at the gate
C) Only if security personnel are present
D) No, A&E vehicles require special isolated parking areas
Ammo 51 Course MV-DL Practice Questions and Answers
Instructions: Select the best answer for each question.
Topic 1: Vehicle Inspection and DD Form 626
1. What form is used for the inspection of motor vehicles and cargo spaces
transporting ammunition and explosives?
A) DA Form 581
B) DD Form 626
C) DA Form 3151-R
D) DD Form 2890
Answer: B) DD Form 626
Rationale: DD Form 626 is the official form for mechanical inspection of motor
vehicles and cargo spaces used to transport ammunition and explosives (A&E). It
provides documentation that the vehicle meets safety requirements at origin and
destination .
,2. During an inbound inspection, you see one of the door seals is damaged and
appears to have been cut open. What action should you take?
A) Ignore it if the cargo appears intact
B) Contact the origin shipper immediately
C) Move the vehicle to an isolated location and contact security
D) Complete the inspection and accept the load
Answer: C) Move the vehicle to an isolated location and contact security
Rationale: A damaged or tampered door seal indicates a potential security breach.
The proper procedure is to isolate the vehicle and immediately contact security
personnel for investigation .
3. A military explosives driver needs to transport A&E to a range that is 20 miles
from the station. Can she complete the DD Form 626 inspection herself?
,A) No, only certified inspectors can complete the form
B) Yes, but only if transported in a Navy or DoD vehicle
C) Yes, regardless of vehicle type
D) No, the driver is never permitted to self-inspect
Answer: B) Yes, but only if transported in a Navy or DoD vehicle
Rationale: Drivers may complete the DD Form 626 inspection themselves when
transporting A&E in Navy or Department of Defense vehicles .
4. What is the purpose of DD Form 626?
A) To request ammunition from the ASP
B) To provide for mechanical inspection of the motor vehicle and cargo spaces
C) To document ammunition turn-in
, D) To track lost or damaged ammunition
Answer: B) To provide for mechanical inspection of the motor vehicle and cargo
spaces
Rationale: The primary purpose of DD Form 626 is to document mechanical
inspections of vehicles and cargo spaces used for transporting ammunition and
explosives .
5. A truck carrying A&E has just arrived. Someone directed the driver to park in a
designated location inside the installation. Is this acceptable?
A) Yes, if it's a designated location
B) No, the truck must remain at the gate
C) Only if security personnel are present
D) No, A&E vehicles require special isolated parking areas
