New Mexico EL-1J Electrical Distribution Journeyman
Exam: Questions with Answers and Explanations
Questions And Verified Answers With Rationales Just
Released.Pdf
This practice set is built for candidates preparing for the New Mexico EL-1J Electrical
Distribution Journeyman Exam. It includes multiple-choice questions in two 100-question
batches, with correct answers in bold italic and explanations in italic for efficient review.
Coverage
The set covers electrical safety, PPE, grounding and bonding, transformers, distribution
equipment, overcurrent protection, transmission and line construction basics, system
operations, and New Mexico licensing and renewal requirements. It also includes New
Mexico journeyman classification rules, exam eligibility, passing score requirements, and
continuing education obligations.
1. What is the primary purpose of the National Electrical Safety Code in
distribution work?
A. To replace all local licensing laws
B. To set safety requirements for electrical utility and distribution systems
C. To define only residential wiring methods
D. To regulate appliance manufacturing
Correct answer: B*
, The NESC is used to guide safe installation and maintenance of electrical
distribution systems.
2. Which New Mexico license classification is associated with electrical
distribution systems, including transmission lines?
A. ER-1J
B. EE-98J
C. EL-1J
D. ES-1J
Correct answer: C*
EL-1J is the journeyman classification for electrical distribution systems,
including transmission lines.
3. How many hours of continuing education are required for New Mexico
journeyman electrician renewal?
A. 8 hours every year
B. 12 hours every two years
C. 16 hours every three years
D. 24 hours every five years
Correct answer: C*
New Mexico requires 16 hours of continuing education every three years
for journeyman renewal.
,4. How many of the required continuing education hours must be code change
instruction in New Mexico?
A. 4 hours
B. 6 hours
C. 8 hours
D. 12 hours
Correct answer: C*
At least 8 of the 16 hours must be code change instruction.
5. What is a key goal of wearing PPE in electrical distribution work?
A. To increase work speed only
B. To reduce electrical and arc-flash injury risk
C. To improve tool storage
D. To replace lockout procedures
correct answer: B*
PPE is used to reduce the risk of injury from shock, arc flash, and related
hazards.
6. Before working on an energized circuit, what is the safest first action?
A. Paint the enclosure
B. Verify voltage and follow safe work procedures
C. Replace the device immediately
, D. Remove all labels
Correct answer: B*
Always verify conditions and follow safe work practices before beginning
work.
7. What is the main purpose of a lockout/tagout procedure?
A. To label tools
B. To prevent accidental energizing of equipment
C. To reduce paperwork
D. To test conductor size
Correct answer: B*
Lockout/tagout prevents unexpected startup or energization during
maintenance.
8. Which of the following is a grounding function in an electrical system?
A. To increase resistance in conductors
B. To provide a low-impedance fault current path
C. To eliminate all circuit current
D. To raise voltage to utility levels
Correct answer: B*
Grounding helps carry fault current safely and quickly to open protective
devices.
Exam: Questions with Answers and Explanations
Questions And Verified Answers With Rationales Just
Released.Pdf
This practice set is built for candidates preparing for the New Mexico EL-1J Electrical
Distribution Journeyman Exam. It includes multiple-choice questions in two 100-question
batches, with correct answers in bold italic and explanations in italic for efficient review.
Coverage
The set covers electrical safety, PPE, grounding and bonding, transformers, distribution
equipment, overcurrent protection, transmission and line construction basics, system
operations, and New Mexico licensing and renewal requirements. It also includes New
Mexico journeyman classification rules, exam eligibility, passing score requirements, and
continuing education obligations.
1. What is the primary purpose of the National Electrical Safety Code in
distribution work?
A. To replace all local licensing laws
B. To set safety requirements for electrical utility and distribution systems
C. To define only residential wiring methods
D. To regulate appliance manufacturing
Correct answer: B*
, The NESC is used to guide safe installation and maintenance of electrical
distribution systems.
2. Which New Mexico license classification is associated with electrical
distribution systems, including transmission lines?
A. ER-1J
B. EE-98J
C. EL-1J
D. ES-1J
Correct answer: C*
EL-1J is the journeyman classification for electrical distribution systems,
including transmission lines.
3. How many hours of continuing education are required for New Mexico
journeyman electrician renewal?
A. 8 hours every year
B. 12 hours every two years
C. 16 hours every three years
D. 24 hours every five years
Correct answer: C*
New Mexico requires 16 hours of continuing education every three years
for journeyman renewal.
,4. How many of the required continuing education hours must be code change
instruction in New Mexico?
A. 4 hours
B. 6 hours
C. 8 hours
D. 12 hours
Correct answer: C*
At least 8 of the 16 hours must be code change instruction.
5. What is a key goal of wearing PPE in electrical distribution work?
A. To increase work speed only
B. To reduce electrical and arc-flash injury risk
C. To improve tool storage
D. To replace lockout procedures
correct answer: B*
PPE is used to reduce the risk of injury from shock, arc flash, and related
hazards.
6. Before working on an energized circuit, what is the safest first action?
A. Paint the enclosure
B. Verify voltage and follow safe work procedures
C. Replace the device immediately
, D. Remove all labels
Correct answer: B*
Always verify conditions and follow safe work practices before beginning
work.
7. What is the main purpose of a lockout/tagout procedure?
A. To label tools
B. To prevent accidental energizing of equipment
C. To reduce paperwork
D. To test conductor size
Correct answer: B*
Lockout/tagout prevents unexpected startup or energization during
maintenance.
8. Which of the following is a grounding function in an electrical system?
A. To increase resistance in conductors
B. To provide a low-impedance fault current path
C. To eliminate all circuit current
D. To raise voltage to utility levels
Correct answer: B*
Grounding helps carry fault current safely and quickly to open protective
devices.
