FDOT Asphalt Paving LEVEL 2 FINAL PAPER Questions and Answers Verified Solutions Latest Update

FDOT Asphalt Paving LEVEL 2
FINAL PAPER Questions and Answers
Verified Solutions Latest Update


Question:

W to E.

Answer:
Downstation


Question:

Stationing.

Answer:
Starts at 0+00


Question:

Stationing Measurement.

Answer:
1+00 is 100 feet


Question:

Straight Edge is the.

Answer:
Measurement of Pavement smoothness with a 15 foot 4.573 m rolling straightedge


Question:

Straight Edge is used to.

Answer:
identify problems

, Question:

Random sampling.

Answer:
Are random numbers generated usually by a VT for cores to be extracted from the
roadway


Question:

How often should you calibrate a Straight edge.

Answer:
Calibrate at the start of each working period


Question:

Using the manual straight edge you find what kind of spot to place the rolling
straightedge?.

Answer:
Locate a flat area with the manual straightedge and place the rolling straightedge next
to the manual straightedge and the gauge should read 0


Question:

The 3/16 and the 3/8 shims go under which wheels during calibration.

Answer:
The outside wheels to measure the low and the center to measure the high. Gauge
should read 3/16 on the 3/16 shim and vice versa for the 3/8 shims. Make sure the
center wheel moves up and down freely.


Question:

Calibration materials for Straightedge.

Answer:
Rolling Straightedge Manual Straightedge Manual Measurement (ruler) x4 3/16 shims
5mm thick x4 3/8 shims 10mm thick