Sterile Compounding Procedure Test with all Correct &
100% Verified Answers |Already Graded A+
Which of the following chapters of the USP are enforceable by the US Food and Drug
Administration (FDA)? ✔Correct Answer-Chapters 71, 85, and 825 (1-999)
A technician needs to determine if bacteria are present in a sample. Which process is used?
✔Correct Answer-Media fill test
The disinfectant used most commonly when cleaning the compounding surfaces area is
✔Correct Answer-70% isopropyl alcohol.
There are ___ risk levels when it comes to compounding sterile preparations. ✔Correct
Answer-Three
In which area of a facility used in sterile compounding is the highest air quality required?
✔Correct Answer-Class 5
An ISO Class 8 compounding environment is certified by an approved organization from the
✔Correct Answer-Controlled Environment Testing Association (CETA).
How frequently should the hood be cleaned? ✔Correct Answer-No longer than 30 minutes
from previous cleaning when compounding
You need to transport packaged compound supplies from the ante room to the buffer room.
Which steps should be taken prior to entering the buffer room? ✔Correct Answer-Supplies
should be unpacked and wiped down with sterile 70% alcohol.
When drawing up a syringe, the fingers should not come in contact with which part of the
syringe? ✔Correct Answer-The plunger shaft
What step should be taken to access medication contained in an ampule? ✔Correct Answer-
The ampule should be broken at the neck.
When preparing a CSP, a multidose vial can be reentered when needed to draw up a dose and
stored ___ ✔Correct Answer-based on the manufacturer's recommendation after being
opened.
You need to reconstitute a powder form of a medication. Which needle should be used?
✔Correct Answer-Vented
100% Verified Answers |Already Graded A+
Which of the following chapters of the USP are enforceable by the US Food and Drug
Administration (FDA)? ✔Correct Answer-Chapters 71, 85, and 825 (1-999)
A technician needs to determine if bacteria are present in a sample. Which process is used?
✔Correct Answer-Media fill test
The disinfectant used most commonly when cleaning the compounding surfaces area is
✔Correct Answer-70% isopropyl alcohol.
There are ___ risk levels when it comes to compounding sterile preparations. ✔Correct
Answer-Three
In which area of a facility used in sterile compounding is the highest air quality required?
✔Correct Answer-Class 5
An ISO Class 8 compounding environment is certified by an approved organization from the
✔Correct Answer-Controlled Environment Testing Association (CETA).
How frequently should the hood be cleaned? ✔Correct Answer-No longer than 30 minutes
from previous cleaning when compounding
You need to transport packaged compound supplies from the ante room to the buffer room.
Which steps should be taken prior to entering the buffer room? ✔Correct Answer-Supplies
should be unpacked and wiped down with sterile 70% alcohol.
When drawing up a syringe, the fingers should not come in contact with which part of the
syringe? ✔Correct Answer-The plunger shaft
What step should be taken to access medication contained in an ampule? ✔Correct Answer-
The ampule should be broken at the neck.
When preparing a CSP, a multidose vial can be reentered when needed to draw up a dose and
stored ___ ✔Correct Answer-based on the manufacturer's recommendation after being
opened.
You need to reconstitute a powder form of a medication. Which needle should be used?
✔Correct Answer-Vented
