TTT1 Study Guide Questions With Complete Solutions
A company's health, safety and environment policy should be a
combination of labor regulations and ? Correct Answers
Industry standards
A gin pole by definition, is a device unique to the
telecommunication industry that allows head room above the
highest fixed point on structure to lift loads? T or F? Correct
Answers True
A hoist shall be inspected when? Correct Answers Daily
A hoist should be designed to withstand a minimum of , the
maximum intended line pull? Correct Answers 2 times
A red RF sign Indicates what? Correct Answers RF fields
exceed limits for workers
A RF monitor should be worn in areas of unknown RF
exposure? Correct Answers True
According to the applicable industry standard, what is the
minimum height from a lower surface or ground where fall
protection must be used? Correct Answers Six feet
According to the manufacturers specifications, what is the
minimum number of ground kits installed on a single Run?
Correct Answers Three
, According to the regulations and standards there are two levels
of maximum permissible exposure, which group is allowed the
highest level of exposure ? Correct Answers Industry workers
All knots work equally well to tie off a load during a cat head
lift ? Correct Answers False
An operator must take a stop signal from anyone during the
operations ? T or F? Correct Answers True
An overhaul ball provided what function in the operations ?
Correct Answers Provided weight allowing the load line to
return to the ground ?
Due to the resonance frequency and the high power of broadcast
antennas, overexposure is almost always a problem? Correct
Answers True
Exposure to non-ionizing radiation does what to the human
body? Correct Answers Does not permanently change cells
For power lines rated 50 kV, the minimum clearance between
the lines and any part of the crane or load shall be ? Correct
Answers 10 feet
For structural loading purposes the basket and bridle slings shall
always be attached where? Correct Answers At a panel point,
around the leg
How many pounds force is one kilo Newton(kN) Correct
Answers 225
A company's health, safety and environment policy should be a
combination of labor regulations and ? Correct Answers
Industry standards
A gin pole by definition, is a device unique to the
telecommunication industry that allows head room above the
highest fixed point on structure to lift loads? T or F? Correct
Answers True
A hoist shall be inspected when? Correct Answers Daily
A hoist should be designed to withstand a minimum of , the
maximum intended line pull? Correct Answers 2 times
A red RF sign Indicates what? Correct Answers RF fields
exceed limits for workers
A RF monitor should be worn in areas of unknown RF
exposure? Correct Answers True
According to the applicable industry standard, what is the
minimum height from a lower surface or ground where fall
protection must be used? Correct Answers Six feet
According to the manufacturers specifications, what is the
minimum number of ground kits installed on a single Run?
Correct Answers Three
, According to the regulations and standards there are two levels
of maximum permissible exposure, which group is allowed the
highest level of exposure ? Correct Answers Industry workers
All knots work equally well to tie off a load during a cat head
lift ? Correct Answers False
An operator must take a stop signal from anyone during the
operations ? T or F? Correct Answers True
An overhaul ball provided what function in the operations ?
Correct Answers Provided weight allowing the load line to
return to the ground ?
Due to the resonance frequency and the high power of broadcast
antennas, overexposure is almost always a problem? Correct
Answers True
Exposure to non-ionizing radiation does what to the human
body? Correct Answers Does not permanently change cells
For power lines rated 50 kV, the minimum clearance between
the lines and any part of the crane or load shall be ? Correct
Answers 10 feet
For structural loading purposes the basket and bridle slings shall
always be attached where? Correct Answers At a panel point,
around the leg
How many pounds force is one kilo Newton(kN) Correct
Answers 225
